Universal hammock with their own hands

Share - AlexLevchenko92.

This project will show you how step by step To do Full hammock for the campaign do it yourself . It includes a hammock itself, a mosquito net, raincoat and belts of fasteners.

Universal hammock with their own hands 18750_1

In addition to what was said, the manufacture of this craft took about two days.

Step 1: Searches and design

There are two main designs of hammock for hiking - fastening at the "Hammock Bugnet" struts and at the expense of the standing trees "Hammock Unattached". The second type has a simpler and flexible design, which is easier to succumb to modification. The hammock consists of four components:

Nylon base with support rope;
Mesh and nylon sleeve, which will act as a mosquito net;
Big raincoat;
Synthetic fastening belts.

Step 2: Materials

To make homemade You will need:

Materials:

300 × 150 cm - strong nylon for hammock;
240 × 150 cm - strong nylon sleeve;
240 × 180 cm - wicker grid for sleeves;
360 × 150 + 360 × 75 cm - strong nylon for raincoat;
45 × 90 cm nylon waste for a backpack;
~ 300 cm belt;
~ 45 M of Paraconed (3 different colors were used);
20 cm insulating pipe;
Durable thread;
4 palls for a tent;
Means to protect the tissue from water;
2 climbing carbine.

Instruments:

Sharp tailoring scissors;
Iron;
Sewing machine and needles;
Lighter or soldering lamp for fusion of rope edges.

This Cleather It was made using a conventional sewing machine, and does not require any special equipment.

Step 3: Basis Hammaque

Step 4: Made fastening

After several experiments, the fastening of belts in the form of simple nodes was designed to create loops at both ends of the Paracona, which will be running in the hinges of the hammock to ensure the tension using the knotted node.

Step 5: Cut the nylon and mesh for sleeves

30 × 240 cm Nylon slice with 2.5 cm "Pocket";
180 × 240 cm Grid for the middle;
120 × 240 cm nylon with 2.5 cm "Pocket".

Step 6: Solve three sleeves together

We die each seam three times:

Weight with a straight line about 2.5 cm from the edge of the fabric.

Zig-type between the first seam and the edge will reliably screens up the grid and nylon.

We split parts and connect everything around the perimeter.

Step 7: We form a sleeve

Moving the fabric in half (seams from the outside) to form 360 × 10 cm nylon-grid-nylon. Solving along the edge to create a pipe from the fabric, then turn it on the wrong one and shifted the Parakord through each "pocket" to create a loop. These loops are used to pull up the ends of the ends during the attachment, creating a free sleeping place.

Step 8: Cut, Solly Hem and Burn Raincoat

To make a raincoat wide enough, a console 150 cm and 75 cm pieces together. This will allow to shut down. Then I will fix it all and add 5 cm loops from straps in the corners. Withdraw the parakord with a long 600-750 cm for volatile suspension, and we treat it with water-repellent liquid.