From egg trays. Decorative stones for wall decoration.
Master class from Zhanna Ushakova.
For the manufacture of pebbles, we will need: a sharp knife, a line, a pencil, titanium type glue, scissors, cardboard boxes, or any other cardboard, which is, egg cells, plow glue. Cardboard box cut into long stripes. You can also on short, but it is more convenient with long: then cut down the length, as it should ...
I took such a width to fit my presentation about the pebbles, and remained as much waste from the box.
The cells of the tears casually in bends, leaving more relief.
Can be seen yes? I start gluing from the corners to not bother later. Lubricate slightly, not learning, titanium glue and without straightening, but, on the contrary, keeping the volume, glit to the prepared strip. The next piece of glue cleaner: it will be more comprehensive and closed emptiness.
Blops, who, from the edge, I tried to cut and glue the edge to the edge - then less than the right.
Here, the cardboard is filled. Work is going fast enough. I looked at the end already on the machine. Just still, the edges tried to glue more.
Here he is the cherished edge. Cut at a right corner of the block. And even if the angle of "smoked", you can safely replete the edges, caught up under the cardboard: added more convexities. This is still the "stone", besides, as if unprocessed.
Cook the remaining empty places.
Here he is my "savage". Rough, unwashed ... That's how it was on an ambulance hand, it turned out 6x22cm.
Now a little reasoning. You need to smalle the surface of the savage. To do this, it is necessary to attach something. Well, the glue is, understandable - PVA. But what ... I like such handkerchiefs. But at some point they ended. And from Great Latz decided to glue toilet paper. Immediately I will say - not very: extra wrinkles and all that. Although, if you smooth out a little more - nothing. And you can still ...
A-4 paper. So, divided into three parts. Wait for drying not. Only here is somehow not very clear.
That's better. A-4 - Ironing the surface, then my lepty - from handkerchiefs, and at the end - toilet paper.
Another difference in gluing. Lubricate the surface of PVA pebble, we apply paper, what kind of likes it, and then on top of the brush, respectfully in PVA, you whipped to all everywhere. Beauty! But the surface of the A-4 must be missed separately. Then she swells and is also well glued, highlighting the relief.
Well, she, of course, we also whip up, "otherwise we do not see good luck ...".
See what kind of clearing, if you look at the side? Lohotume is carelessly lining on the same PVA: missed the backside with a brush and she was glued.
Here, it was necessary to put ahead. And now I do not know how to do it?
In principle, it is all ... Stone blanks are obtained. Now we select color and paint: first in dark, and then lighter and lighter. So visually deepened the excavations, and the bulges become more ... appetizing, or what? But I painted on the wall. On top - varnish. I have an acrylic peeler (matte, no matter how hard I tried). But if the paint acrylic, then, actually, and the varnish is not needed, it does not smear. And I like it more with varnish - the paint becomes more bright, elegant. At this end. Good luck to all. If something is incomprehensible - ask. I just reversed such pebbles - quickly, simple, light, you can bend (what I did). Printed to titanium. But in particularly swollen places - the adhesive pistol. You can also lay out the Christmas tree, and cut to cut ... that the darling will wish! And you can do in any free minute. I glued when firmly "hung" in the kitchen. And the blanks of a pile set aside to not interfere with anyone ....
P.S. I forgot to add, but everything is clear - in the seams between the stones, then you need to gently put "solution" .... And yet: before painting, I went through the surface of a non-zero acrylic putty.
A source