I decided to show you and tell me how I did this job. I did her as a gift to my sister, a new family.
So, for this, I took the plywood with a thickness of 8 mm, although initially the drawing under the material is 6 mm, it seemed thin to me. Print all drawings, by the way, they are "resurrected" from the work of the beginning of the 20th century.
In the photos, I specifically left the date so that you can trace the time. I remind you that I work in the evenings and in the afternoon at the main job.
We glue and stick on Phaneur, glued with a pencil glue.
Since I cut out my "nichrome", then the rear wall will be made from a solid sheet. In contrast, if you saw it on a logging machine, I would have to cut and then glue because of the "throat" would not allow.
And here, the first cut.
Here is the result: it remains to cut the grooves.
Now I make side walls:
That's what is evaporated.
Now I turn to the bottom items:
Now it's time to cut all the grooves, did not cut off immediately because it changed the wall thickness and it was necessary to accurately decide.
In order for the lines to be smooth used the metal ruler.
We dress the drawing.
Now everything is grinding
And carry out a dry assembly.
It is a small side, here I showed how I had to change the drawing, well, and how it is prepared for cutting - the holes where the wires are driving.
Door cut out only the inner pattern, and after the perimeter, then when we glue the rear background
like this:
The day was relieved difficult, so I decided to do what is easier - the shelves.
And that's what happened:
We glue the already painted background to the door:
Fitting Door:
Painting, since inside the locker color will be different, then I use the molar tape to not blur.
To be continued...
Shared Alexander.
A source