Not only for order, but also for beauty ... With such an adorable organizer, all your mobile accessories will no longer be lost, do not confuse and always be at hand.
You will need:
• Caper with a print;
• decorative tissue with golden spraying;
• Decoville Light;
• Flizelin Flizophiks;
• Sewing threads;
• zipper 18 cm long;
• Elastic ribbon Length OK. 35 cm;
• Portnovsky pins;
• Hand needle for sewing;
• chalk pencil;
• Line for patchwork;
• scissors;
• Large line;
• Cord Long OK. 1m;
• Satin oblique baking Length OK. 50 cm
STEP 1
Cutting (sizes are given in view of the allowance):
From sails with a print: flaps measuring 44 x 22 cm; 12 x 22 cm and 4.5 x 22 cm.
From decorative tissue with golden spraying: patchwork with a size of 30.5 x 22 cm and 13.5 x 21.
From decochyl: flaps with a size of 28.5 x 20 cm and 12.5 x 20 cm.
Step 2.
Both ends of a zipper-zipper are 17.5 cm to fasten the flap of the fabric.
To do this, carve 2 pieces of tissue with a size of 7 x 5 cm.
Sisces with one short side have been found on the wrong side of 1 cm and tumble into the edge on zipper.
Step 3.
Two parts of the organiser from the sails with a print (12 x 22 cm in size and 4.5 x 22 cm) bike on one long slice.
The edges of the edges of the details are found on the purl side by 1.5 cm.
Step 4.
Squeezed cuts of parts are touched on the zipper flashes in the edge.
Step 5.
The inner part of the organizer from decorative tissue with golden spraying (30.5 x 22 cm) to duplicate decoration.
Step 6.
In the middle of this detail, pinch along the elastic ribbon and tap it across several times with an ok interval. 3 cm.
Step 7.
To the external part of the sails with the print (44 x 22 cm size), it is finished with an invalible side first decoration (12.5 x 20 cm in size).
Then, on top of the decorative fabric with a golden spraying (13.5 x 21 cm).
Step 8.
Detail with zipper and an inner part with an elastic ribbon stitching facial sides at a distance of 1 cm.
SPU lap service to the organizer and sew manually to edging.
Step 9.
Outdoor and internal parts of the organiser to be leather the front side and stack around the perimeter at a distance of 1 cm (zipper to open).
SPU allowance on corners cut off the painter close to the line.
Step 10.
Organizer to twist through the open zipper shut down and stop from the inside along the contamination of the color part in the seam.
Step 11.
On the side of the Organizer to sew a manually cord for tying.
Ready!