Made the patterns of Niza and the top, two children. I draw your attention that the top of the cellets is cutting so that in one piece of corrugations to be directed along, in another across, for strength.
Burled them in pairs. Note the future holes for racks. At first pinched the circulation, then the tassel.
And then the drill. The diameter drill coincides with the racks. Now about them.
The racks did also from the cardboard. Cuts the rectangles of 26 x 12, wetted with water and twisted tightly. Twist necessarily across corrugations! I tried to do one along, after drying twisted. When twisted stolen and PVA. Stands are very strong.
Attached racks into the lower part. The photo does not quite well see, but believe everything did in terms of)))
Booted washable wallpaper on the bottom, and after that, crossed the tubes all racks. Progressing PVA with water.
Pucked up the top and tried out. The legs made four because the upper part is bent.
Occultured the bottoms and glued her risers to the top.
Similar to the bottom. And began to weave in a circle.
The bottom was dried by conservation. Flew without a form. I think at such a height it is possible. 14 rows of the pigtail were quenched. The front part.
Then she glued the top to the racks, risers rinsed and began to flip side parts. The photo shows that the load of the racks can withstand large.
When I was supplemented to the top, connected with risers and began to weave again in a circle.
It can be seen here how easy to weave even large items, if there is a chair spinning without a back and armrests (in one time I broke, knew that it was more convenient for weaving). Do not around walk, do not turn the product itself. Highchair Magic himself will do everything)))
On the top used partial weaving, similarly as when knitting.
A few words about the bending. Proper with yellow tubes one row pigs and one row in three tubes. Then the risers looked for these rows. Then first under the second and for the third top down, and that's it. I am such a bending resembles a tambourine seam.
On the bottom wallpaper painted by verse.
Organizer is ready. On the side parts between the riding and bottom glued the pigtails to hide all flaws.
Also from the cardboard glued a cup for brushes, pasted the tubes and glued it into the right corner.
Here is the upper part. A bunch of jars with different colors, glue, primer, sponges, etc.
And then ... "Ostap suffered ..." I tried to find another use))))))
And this is a draft rehearsal to the country season! Tomators ask for already dive! ))))))))
A source