I want to present to your attention a master class on making such a beautiful fireplace from a cardboard box from the TV)))
To work, we will need:
- Cardboard box from the TV (in my case it is 55 ")
- painting ribbon (roll)
- Hot glue gun
- primer under acrylic paints
- stationery paper knife
- Metal ruler
- paint brush
- Conventional kitchen sponge for applying decorative plaster
- acrylic white paint
- Putty for outdoor work
- putty knife
- Decorative plinths and borders
- Plasterboard (for a shelf)
- Penoplex or foam (for a shelf for firewood)
- Decorative Mosaic Ceramic Tile
- Electrolovka (Bulgarian)
2. For the beginning we take our box, get all the "insides" from there, give the right shape with the help of a stationery knife and a ruler.
I did this: at first I met the desired size, then putting the line with an easy pressing on the knife cut the upper layer of cardboard ... Then it was curved and secured with a painted scotch. Next, with the help of a stationery knife, cut a hole for the furnace))) all the bends went through a painting ribbon. Inside, made a strut from cardboard and glued them with a glue gun.
That's what happened)
3. Cause of drywall with the help of a stationery knife to cut the shelf. It is for a hot adhesive gun.
4. Come on the foam cutting the required shelf thickness and we glue with the same hot glue to the plasterboard sheal.
From a piece of fastener (facade insulation), cut the desired size shelf for the furnace.
Covers our fireplace of the soil with a painting brush or roller.
That's what it turns out) Now all the depressures, cracks and nyans are visible, which we remove the next stage with the help of putty and spatula.
5. And)) Our fireplace is already covered and painted with white acrylic paint with the most ordinary kitchen sponge)) Timeline!)
With the help of the jigsaw, cut the decorative plinth and glue with hot glue !!!!! The bottom is decorated with the help of decorative ceiling plinth. This is how our fireplace looks like now)))
6.Fig is the most pleasant thing in my part)) Decor!)) For the fire decor used ceramic mosaic tiles, the halves are cut with a grinder ... glued all the same hot glue gun.
Then on the sidewinks glued tiles)))
7. The fireplace again scored white acrylic paint. The furnace decorated the remnants of putty (coarse thick brush applied with sharp engagement movements ... It turned out the effect of the rough surface.
The final stage was the application of decorative pearl plaster ... because A special spatula for applying such plaster in the house was not, I applied this beautiful plaster with the help of an ordinary kitchen sponge))) The effect turned out to be super!
8. And here I am (left) and my girlfriend a professional photographer of Sparva)) The illumination of the fireplace was made using New Year's lights that were installed for firewood))) Firewood - Birch)
9. And this is my daughter (photo from the professional photo shoot) in the decor done by me)) The horse (ordinary wooden) decorated decoupage in the technique (but this is another story!)
All creative inspiration! And pleasant viewing!)
A source