A practical manual for those who also as I suffer from all garbage wants to make any materials in the form of a normal book with binding.
A very long time I wanted to do this - print my records for myself and my family so that you could read them, not looking into the Internet (especially who is in my blog besides me?). Something like a family album, just not with photos, but with small stories about our life.
(I will make a reservation, perhaps immediately. As a visual allowance for creating your book, I used materials from the Internet. A separate respect and respect the author. Thank you very much)
So let's go:
1. First, the book must be printed.
I did it like that.
Installation of the file in the Word Program Making Such:
We go: File - Page Parameters.
Put:
Fields: Top 1.5 cm, Lower 1 cm, inside 2,5cm, outside 1.5 cm.
Page Orientation: Book
Several pages: mirror fields
Paper size: A5
We go: Insert - page numbers.
Put:
Position: At the bottom of the page
Alignment: Outside
Only then make a layout - that is, they edit a little bit, we will lift, align that everything was beautiful and did not jump from one page to another way, as we do not need.
Then print.
I did not find a normal program for printing "book". I didn't really look for. Because I prefer such things to do manually, looking through separately each piece of paper (and reworking it if that) so that it is for sure everything is as I want.
I printed like this:
File print.
I install: Pages - Numbers (I fit through the comma, those numbers, which I need on one page A4. For example, if you collect a book with parts of 10 sheets, then there will be 40.1 on the first page on the second 2,39, etc.) .
And necessarily - the number of pages on the sheet - 2.
Ready printed sheets must be bent and assembled into brochures. Then sew or bore the stapler so that the sheets are not disconnected.
Sasha spun around me, spinning. Later:
- Is this a book that about us?
- Yes.
He hung quickly one brochure and running to the toilet. I scream him:
- Sasha! She is not yet completed! Give!
Voice from toilet:
- Wait. I have to know what is happening to me!
2. Bloom the brochures.
In the manual there is no, but I did. Just in case.
For this, the brochure is neatly folded in turn, we divorce glue and pressed. (PVA glue)
3. We make an easy-to-press under the press.
What happened, put it neatly on a flat surface, press on top of another smooth surface and pressed something heavy.
I was useful: a broken shelf (of course, to repair no one) and Lehina Gandelie. But if someone has special vice, then it is even better.
Small, millimeters 5, edge (end) leave free (for further execution).
Lech from the street comes:
- I did not understand, but what are my dumbbells doing here? And mom, why do you have a person? Did you swing ??!
Yes, I secretly swing in the kitchen when no one sees! You still have everything here, who are in the main house!
4. Lubricate the end of the PVA glue.
Actually, no comment. Lubricate - and that's it.
5. Cut the end.
In fact, it was necessary to do before the lining glue.
But Ksyushenka is all through the ass not like people. And maybe, therefore, I managed with a conventional bread knife (I did not find the knife, because with these numerous men at all, what tool in the house will find) - the end of the soften and cut it, it became very simple as the oil. Noise (Normal people with hacksaws will be repaid) It is necessary to make such a depth so that it affects all sheets, including internal. Otherwise, it will be difficult then to flash. That is, a millimeter 3 - 4.
Cool photo, yes?
The worst and most severe K. stabbed to death poorly, removed by Gandeli shorthrown.
If still dried glue was a scarlet color ...
Cuts (marked) should be an even number. I have six.
Here it is - bleeding with blood (glue) slaughtered to death Highlander:
6. We glue a rag. (Normal people in this place are sticking fabric. Remember?)
On the fresh wounds of the poor end stick a cloth. Cloth can
Then the book must be well sued.
Leave it overnight under the press (one, wounded, in an empty dark kitchen) - in principle, enough for full torture.
7. We flash.
And the next morning we start to continue.
Every brochure of the book is sewn to the sucks with a cloth threads. As everyone has already understood, the firmware is conducted through those holes that turned out as a result of marked with a rusty blunt knife.
(And do not look that the rag is already in chocolate. Yes, I ate!)
8. Wash the end of the glue.
We make this walk, faster, right on top of the threads. It will be good if the glue is not very liquid.
I do not know if the glue is visible on the photo on top of the threads, but my knees in the training are exactly visible.
Yeah. Here you go.
And then the most interesting part of the work.
9. Make the cover!
For the cover you need a very dense cardboard. I cut the old, Soviet production, with a quality mark (mom in one time gave) folder for papers. I did not find in our stores good cardboard! And I did not find normal new folders. And those that found, which could more or less approach, cost as a new book. So, I tell you, some Soviet things with a quality mark are still very relevant.
Cut from very dense cardboard two rectangles. Everyone should be ... Well, like a normal cover, so that in front of a millimeter 2 - 3 acted for pages, and from above-below, too, too much. Well, or in a different way, as you like.
In my case, it was dimensions of 224x156. That is, about 7 mm from three sides. Walk so much!
And another rectangle cut out from ordinary fine cardboard. In length, it should be the same as those big rectangles, but in width correspond to the thickness of the end of the glued book. I got 224x 30.
Then cut out two rags (for smart again I translate - two pieces of fabric)
One cloth is long as our narrow cardboard rectangle (224mm), and a width of centimeters by 6 - 7 more of it (90mm). The second cloth is width, like the first (90mm), but is already about 6-7 cm long (300).
Then lay out the cover.
A narrow rectangle of cardboard in the middle, and two large and thick - on the sides. (Muzzle down).
Attention: Between them should be a gap. Millimeters 5, no less!
We glue a small piece of fabric. So that it closes the middle of a narrow cardboard, the gap and grabbed the thick cardboard on both sides symmetrically.
I turn over.
We glue likewise on the front side a long piece of fabric. So that symmetrical tails remain from above and below.
I turn over.
We lay the tails and glue and to the wrong way.
Maybe not very clearly described, but it seems to be clearly visible on the photo that it should turn out.
Inner side
Outdoor
Now the most creative part.
We take beautiful paper. Preferably dense. Or even a self-adhesive film (a good name, yes? Self-adhesive! Type actually took and glued down to the address). Cut the desired size and wrap up from the front side what happened. Flashing beautiful paper on the inner side must be 1 - 2 centimeters from all sides.
Well, then we only have to glue the cover to the short-minute cover.
We glue the protruding parts of the rags that hang on the sides (which I have in chocolate), to thick cardons. Rovenko.
Then the pure A4 sheet fold in half and put the mousets, grabbing the end of the book at the end. This, I think it is not difficult to guess how to do.
Well, everything is ready!
You can now boldly put it in the toilet for a popular familiarization (which I did, now, rightly the whole family is aware that happens to them).
A source