Long experienced, I was aspaluated and still decided that the kitchen is much more profitable to do it yourself. Those amounts that take kittens for a set of cabinets made from chipboard are simply expedited. Odent medium kitchen, but not quite standard, obstacles, which in the kitchens does not specialize, assessed in 190,000 rubles. This is to buy the kitchen you need to pose several months exclusively on it. I can not afford such luxury and, armed with various kinds of articles, as well as the valuable experience of my friend, who has already done the kitchen, I began to cool what should be my kitchen.
In fact, the process is quite fascinating. For the time I am thinking about this project, I changed the view of the kitchen 3-4 times. As a result, it was possible to reduce the cost of the kitchen quite essentially. Ultimately, I got such a design project (without facades).
Designed in the SolidWorks probe, although, in principle, it can be done on a sheet of paper, just in the "Solid" I personally and easier and more visually.
Below is an earlier version of this kitchen, which was noted because of numerous roundings, which added the cost of the kitchen. Additional tens of thousands (there is even hanging the cooking panel =)).
Based on this project, a list of parts was drawn up to be made from the chipboard (this case) and the parts from the MDF (these are facades) .DSP ordered in the company Eurocra, they counted about 15,000 with the edge + 2000 WHP for the rear wall. Total 17000 rubles per case.
Facades and fittings ordered in the company Furnitarium. Facades with additives under the loop came to me at 25,800 rubles, and accessories at 12,700. In the end, 38,500 rubles. Initially, it was planned to take only Blum or Hettich, but pressing the lockers on cheaper imported analogues decided to dwell on them, since the goal was exactly more economical kitchen. As a result, the goal was achieved. For the hull with facades and accessories, I gave 55 500 rubles.
Even taking into account the fact that it is necessary to purchase a worktop, fasteners and slats for the suspension, the difference in the cost is felt and very sensible.
Also, I also purchased the equipment necessary for the assembly: clamps, a screwdriver, a drill under the confirmation (by the way, you can order all the holes immediately in the manufacture of cutting). But then I was so passionate about the idea of saving, which did not pay any attention to this moment, but in vain, because with the holes to collect the furniture much more pleasant =).
Probably, the assembly process itself will not be described (if something is interesting, I can answer all the questions in the comments), so I will bring brief results:
1. The first, and the most important plus, is a great experience. After the kitchen, it's not too scary to start doing a dressing room and the table (and I'm going =)
2. The second (not the most important, non-obvious) is the price. For the housing, facades and accessories I gave 55 500. Further, the countertop - 27,000. Handles - 2 500. Socal 2,000. Total 87,000 with some reservations. The countertop could be made cheaper if we take a tabletop with 28 mm (we have 38) and with joints, then the amount of 15,000 and the total 75,000, which I consider it a good result for the resulting kitchen.
3. Of course, not everything went smoothly and several moments during the design I did not take into account, so I had to get out on the spot. It is difficult to provide all the moments without having an appropriate experience, but, in general, I am very pleased with the result.
4. Of course, if the reader has an amount in the area of 150,000 - 200,000 rubles, which it can painlessly pull out of the budget (in the amount, the washing, cooking panel, oven, etc.), then it will be much easier to just order yourself The kitchen, but I had a rather sharpness of money.
In general, in a dry residue, I got a cozy kitchen at an acceptable price for me, spending on it in a total amount of 5 months. But, if you consider that almost half of this time I was on business trips, then it is not so much. And yes, if you take 2 weeks of vacation and do, do-do, then everything can be done in two weeks =).
A source