Good day, dear my needlewomen! I want to provide you just a super-super idea of the alteration of an old fur coat, so in such an original, warm fur coat. Surely, many of you in the closet hanging an old fur coat, which and throw out a pity and did not occur to the idea that it was interesting to create it. Dare, a little patience and everything will turn out! In the same order, as a master class on the manufacture of a sermon, you can make a warm vest and scarf with a cap.
Next, from the description of the author of the Inhi master class. There is a white fur coat, or rather, it was already. Sleeves and sidewalls swatched, but throwing out very sorry, warm and beautiful was a fur coat.
I climbed on the Internet and saw several sites about a woven fur, about bilateral weaving, about knitted fur .. and decided to alteration.
She chose a weaving into the mesh. So more economical. But the bilateral weaving is much more beautiful and you need 2 times more fur than I have.
I will immediately say that I have suffered for a long time, the splash, climbed, picked up the threads and experimented, and I decided, I resolve my fur coat, minted (did not press), dried and work began. I feel that it is not fast because it requires the perpetuity and experience that I will get in the process.
The coat of the resorne and tied the grinding mesh. Threads HB Hook thugs.
It is important to choose the thickness and color of the thread so that it does not stand out, it was not visible from under the fur. I calculated a long size of the mesh and the length and still mistaken, it was necessary to suspect the length, but to cut off too much. I bring an example for 46-48 size. It didn't knit from the bottom up as accepted and with the side, when you try to try on the sample.
Sleeves.
She gained 59 air loops and knit 59 columns with Nakud.
Tied 5 rows straight columns with Nakud.
Then he added at the end of each and at the beginning of a new row on the one hand. Printed 17 rows with adding.
It turned out 75 columns with Nakad and 22 rows.
2 rows without adding, right. 17 rank rows. Also, he also left at the end of the row and at the beginning of a number did not give a column with Nakid and again 5 rows of straight columns with Nakud.
Locked 1 cm strips on the leather side of the fur. You can and less if the fur has a long pile. I have a satin rabbit, a fluffy pile, but short. Numbered.
Cut the pieces not all at once, but as they are walked into the mesh. Cut the blade, very neat and evenly. Blades are preferably stocking more because it is quickly tupping. It is necessary to cut on the weight so as not to cut the fur with the skins. With my left hand, we raise the fur and the right cut as accurate as possible.
Where the numbering is the top of the strip and the fur is directed down. It is very important that the stripes have the same pile direction. Behind the top edge pinned a pin and made a fur strip into the mesh. As a result, the strip of fur lay along and not across, that is, as if from top to bottom.
Here you can experiment. I was more approached weaving after 1 mesh. So tight and think that it will be warmer. The tails have not yet sewn up, but intending to do it later when we climb all the details, suddenly it will have to pull it out or the opposite to stretch.
Sometimes the stripes are not enough because there are poisons on the fur and I cut them off and thrown out. I had to sew a strip from another piece. She sewed into the edge thin needle. I read that you can stick, but I refused this option. I want to be practical.
After the whole fur strip is extended by a needle and raise the pressed fur.
And so continue to the end.
Here is our pusher and ready ... almost ...
It turned out of course as it is uneven. But in general, a soft, gentle and elastic canvas. Husband said that beautifully and what I would come for myself. Well, let's see that from this venture will be in the end.
I turn to the second rusher.
BACK.
Tied the back, or rather two halves of the back. If I am mischieving in size, then I will have the opportunity to fix it - dissolve, not tolerate the entire back, but only its part. I am only looking at this kind of needlework, so I admit that there will be mistakes. I myself am very worried about what happens in the end. The coat cut into stripes ... Will what I painted my imagination? Time will tell. I recommend it to wait for the end of work, where I clearly and describe all the mistakes, I will fix them, I will give recommendations.
Knit like this:
The same H.B. Threads and hook is thickening.
I crocheted with a crochet 51 air loop and tested 51 columns with Nakud.
Prum: knit 10 rows tied at the end of a row with a facial and invalid additional column with nakid = 61 S.N.
Shoulder: added 21 air loops and accumulated 21 S.N. TOTAL 82 S.N.
Added at the end of the row only from the front side 1 additional S.N. Knit 10 rows = 86 S.N.
The neck: Knit 5 rows; reduction of 1 S.N. in the face row = 81 S.N. And 5 rows straight.
Total: 30 rows and 81 S.N. Mesh - the basis is ready.
Fastened, dried, stood half the back and proceed to weaving.
Like the rusher completely overlooked the back against fur stripes. She sewed both halves of the back. As a result, the seam is not visible at all.
Shelves.
For the shelter, recruited as on the back 51 air loop.
Prum: knit 10 rows tied at the end of a row with a facial and invalid additional column with nakid = 61 S.N.
Shoulder: added 21 air loops and accumulated 21 S.N. TOTAL 82 S.N.
Added an additional column with an attribution at the end of a row with a facial and invalid side. Knit 10 rows = 90 S.N.
The neck: at the end of the last row of the shoulder did not legal 6 S.N. Greased in 6 rows 3 S.N. = 81 S.N.
Making sure that all the details are symmetrical, turn into the sewing of the fur strips to the grid. This is not a long, but tedious. The photo shows that the bottom I sewed on the sides, and the top right where the mechanic strip is cut off. This is done in order to tie the finish at the bottom.
Now sew all the details.
To begin with, I stitches my shoulders, then we sew the sleeves and at the end side seams. Sew tried in different ways, but the seams were visible everywhere. I decided to sew simply, as usual for a needle.
Through the shoulder seams, as well as the entire arm, sewed a thin braid. It did so that the shoulders and the provisions would not stretch.
This is how semi-prepared, stitched by a fur coat.
After all the work done, as well as heaps of thrust pieces turned out to be short-coat. It is necessary to lengthen it on the sleeves and the bottom. My calculations were both faithful and not true. Reliable in the sense that the stripes turned out in the bunch, and not correct in the fact that he is short.
I have already seen a decent pattern. I am going to perform it with a crochet and tie to the fur. It turns out a double-sided finish. The hood is also going to link with a crochet and tie to the fur.
HOOD.
I did not get a hood and cuffs with an openwork pattern - I did not like it. I decided to make a hood of stray as both a serrated coat, and the cuffs, the bottom and edging of the hood lay down the remnants of the fur with the addition of pieces of dark mink.
Related mesh for a hood.
Scored 51 V.P. Tied 51 S.N.
Knit 10 rows reduction at the end of a row with the facial and at the beginning of the involvement row = 41 S.N.
11 row straight.
Dignify
With 12 rows of 12, 16, 20 row 1 S.N.-Okat Hood. The bottom of the hood is lying straight.
We continue to subscribe an open hood in 22 row, and on the other side of the same number (bottom of the hood) do not see 5 S.N.
In 24 row, everything is also. In 25 row to plunge 13 S.N.
Although the transitions at first glance are rough, but when the fur strip is selected to the edge. The transition will become smaller. And after the hood is saved, it will not be visible.
I turn to the braid of the hood.
Stood strips.
Cut, Oparla and sewed stripes to the edge.
She sewed As can be seen, there are no sharp transitions at all.
I turn to the edge of the hood. Earlier, the edge was out of the mink, and I rush it up.
Crocheted over the entire length of the edge of 80 S.N. Tied a mesh. Stood and cut the fur stripes. A little fascinated and has already begun to be mastered by fur.
So that the fur coat becomes more attractive and not so boring, slightly diluted the fur with a black mink. The benefit remained small pieces. It was interesting to intertwined, especially since the black fur revived the pale fur.
When weaving, it is important that the fur is on top, and the skin flies to the grid. In the course, I corrected the fur, I flick. Tied 2 rows. It was enough. The rest dismissed. The edge of overlooked fur.
This type of weaving is double-sided. I watched this. When I conclude her should not be visible.
It's time to sew a hood for a fur coat. Sheos looked stretched and, as with his shoulders, she sewed a bay and a little appropriated. Sits tightly in the neck. It is successful.
The idea with black pieces succeeded. Looks cute. The fur coat does not look so simple and sad. The same method I'm going to apply to cuff and bottom of the fur coat.
36 S.N. scored on the cuff Knit 7 S.N. He left the fur strip.
At the bottom of the serpent scored 120 S.N. Opal. Here you can adjust the length of your wicker.
The edge of the shelves scored 74 S.N. All overlooked fur stripes.
The photo shows that by the very edge I left the white mink, which remained from the hood. Not enough for a small strip on the shelf. She lezed the usual fur strip.
In principle, the serpent is ready. It remains to sew lining and clashes. It turned out my fur coat more and wider than I expected. It sees because the base is braid. Therefore, the next time I will gain less.
Here in principle, and almost ready for my serpent. She sewed her shoulders, lining, bought clashes. Winter has already passed, and a test for farmability has not happened.
In principle, I am pleased with everyone. The serrated fur coat, warm, plays when driving. Just a little big.
She sewed an inner pocket.
A source