Information on the topic
Restarating furniture, strengthen loose connections in certain areas. You can fix metal corners to the back or bottom of the product so that they are not noticeable. If this method is unacceptable, run the connection. To do this, separate the carefully weakened connection with the help of a hammer, pre-laying a piece of the board under it, which will protect the tree from damage. Take the old glue with a spatula or knife until you get to natural wood. Clean it with a rough file. Apply glue on both surfaces. Erase excess glue. Secure the connections with woven ribbons, clips or vessels. To glue the wooden parts of the restored furniture, both natural - glutin (carpentry), casein, and synthetic (PVA, BF-2, K-17, KM-12, CMC) adhesives are used.
Remove the old paint. Wide flares gently cover the entire surface with paint wash. After an hour, the spatula carefully remove. If there are metal broken fragments, process them with a special solution. If the wood places in places, it is necessary to treat it with a metal brush, remove dead fabric. Then quickly my jet water. Water should not penetrate deeply, just wash off.
Removing old polishing with a thick binder composition.
• Pour a little binder in a container with a wide neck (mug). Gustly apply the composition of the brush in one direction to the site, approximately 50x50 cm.
• Wait until the composition soften the coating (time is indicated by the manufacturer). The binder is valid until it is wet. Usually one coating layer is usually removed. Spatula squabble coating in the direction of wood fibers. Remove the remote coating on the newspaper. Repeat all operations until the natural tree appears. Coating in hard-to-reach, uncomfortable places are removed by an old toothbrush.
• To remove the remaining coating and binder in the restoration of the furniture, wipe it with metal cotton.
• Apply a metal cotton thin layer of a binder into a square surface of 30x30 cm. Wipe with a paper towel. Let dry. If necessary, treat the tree with coarse sandpaper to correct the imperfection of the tree or eliminate the traces of the dry and the old paint.
• Clean the tree with emery paper shallow grain to completely align and purify furniture for which they produce a restoration, and wash it with a rag.
It was the turn of putty on the tree. It is not always needed. If we want to keep the effect of antiquity, the pronounced texture of wooden fibers we need. If there are holes from nails, deep defects, put on their rubber spatula, thin layers, giving each layer time to dry. After drying, we pass emery paper to align the surface. We wipe everything with a slightly damp furniture napkin. Furniture is ready to paint!
Varnish. On unfolded newspapers or films are happy painted and smoking chairs, chest of drawers, a wardrobe, a table. What do you do next? Hide varnish or paint, and already then hide varnish? Varnish is glossy, silky and matte. Here is the case of taste. How much gloss want, choose such and varnish. Better spray, it will fall flat thin durable layer. I, relying on experience, I use the Presto car varnish for all work. He never failed. And the Sorographer Bottle is enough for a long time.
Painted. As in any other painting - we define the style. Flower-rubble themes will definitely give home the style of Provence. All sorts of squares and stripes - Country style. All elements of African and Australian symbols - ENOSTIL (background for this black, brown or red). But no one prevents you from thinking of your style.
Istchonik