Today I will show my secret technology, thanks to which such beauty is obtained:
These are the most simple earrings from my collection of jewelry, you can make them really quickly and easily. Usually, scent decorations are very suitable, complex, sometimes even bulky, for example, our other works:
In general, the scent decorations are accepted. And this is the main problem for beginners, because if there is no skills neat sewn, it is impossible to make a beautiful thing. The main material of the scentual decorations - beads and a shattered braid, it looks like this:
This is a thin flat cord, and it is very convenient to wash beads and beads. But in this master class I will show a completely unexpected way of working with a story. So, we will need:
- Judging Tape
- 2 crystals without holes and a flat back (I have - Swarovski)
- 2 carnations for earrings
- 2 long beads for decoration (can be without them)
- super glue and transparent moment
- Thin leather for the back
- Pins
And how could you already guess, we will not sew, but glue!
First you need to fix the tip of the cord on the back of the crystal, for this we drip super-glue and glit
Then it is necessary to start wrapping the crystal with a cord, and the first round must be firmly glued to the end of the crystal, the most convenient to turn the crystal in two stages - first one half, then another:
After that, super glue can be postponed, it will no longer need it. Next, it is necessary to build several turns of the cord on the spiral. I put your fingers with your fingers, and wind the story is not very tight, otherwise the product will bentified, or loops slip.
All the time you need two fingers that you hold the workpiece, slightly flaming it so that all the turns are fluent in the plane. When your taste is thick enough, it will be enough, 3-4 pins secure the workpiece, pushing from the front of the earrings all the layers of the fuss
At this stage, it is necessary to check again that the product turned out absolutely flat, not curved, and the turns of the cord smoothly lay down.
After that, we are armed with a transparent glue moment, and fill the entire insular surface, thick and not regret, because the textiles has a well absorb glue well, and we need to create a dense layer of glue, which will keep the whole design together.
We leave to dry, but not necessarily until complete drying, it is enough if your fingers stop sticking to the glue. Pins can already be removed, because it will be quite tight to keep working. For example, you can sew a long bead if you decide something like this to add to the earrings. I chose silver pendants in punk style, in the color of the crystal
The technical part remains - secure the carnations and cover everything that is not intended for the view of thin skin. Carnations should be caught on the glue, and install at the top of the earrings, not in the middle! Otherwise, the earring will leave up and close not only the lobe, but also the half ear.
While the glue dries out, cut the mug of the skin more or less suitable color, it would be nice if this skin is no more than 1mm thick, then it turns out very carefully and elegant. In the circle, a small slot should be done, through which the carnations will come out.
I am putting the skin with the skin with the inside (also a walking), glue it to the earrings.
That's all, agree that it was not difficult at all. Of course, these earrings are simple and minimalistic, more complex models will not do that, but for a beginner - the most it is!
By the same technology, you can make quite large things, for example, this necklace is:
Thank you all for your attention and success in creativity!
A source