You can learn a stool from anything: from the board, put on top of a wooden bar, from an old drawer and even from an inverted bucket. And practically anything can be made it from the finished stool. For example, turn it into the stand for umbrellas, which will set the ironic tone of the entire hallway.
Our stand will stand at the entrance door in the company of wet umbrellas - rubber shoes will definitely not hurt.
Materials and tools
High stool (we boring a bar stool in IKEA)
5 mm thick plywood sheet
Drill with a nozzle for plywood (drills a wide circle, not a point hole)
Electropolitanzik
Furniture stapler
White acrylic paint
Metal hooks
children's rubber boots
1. We unscrew the screws and remove the seat from the stool.
Lobzik drink a square hole in the seat - we will put umbrellas there.
2. Cut from plywood square in the size of the toaster. It will lie on the bottom strapping of the legs, for this in the corners of the square make the grooves the desired size.
Serve in plywood holes for the tips of umbrellas using a drill with a nozzle for this.
3. The entire stool - both the base, and the seat, and the plywood insert - paint in white.
4. Paint dried. We screw the seat of the former stuff.
5. Faner Freaky with a furniture stapler.
6. In the end of the toaster screwing the hooks - they will hang keys on them.