I have a lot of finished embroidery in the closet, which did not decorate the room, because it did not work out beautifully arrange in the frame. That edges supar, the fabric slides and dugs. But finally, it turned out to make a beautiful smooth picture that remains such and over time! I'm not saying that I came up with something new, maybe someone does so. But, I think this master class can become useful for those who are still suffering with embroidery.
We will need not so much tools:
- Ready embroidery;
- frame;
- dense paper or thin cardboard;
- scissors;
- line;
- pencil;
- threads;
- needle and pins.
1. To begin with, it is good stroke work with an iron with an inside.
2. We take the back wall of the frame and supply it on dense paper or a thin cardboard. I have watercolor paper.
3. Connect the center of work with the center of the cut sheet and pick up the pin.
4. Evenly pulling and smoothing the work, pins it with pins to the sheet around the perimeter.
5. I turn over and cut the cloth, leaving the allowance of 1-2 cm.
6. Conduct the allowance for paper on the one hand.
7. We drive the right corner. It is necessary so that the corners look carefully.
8. Once again we fell the allowance, slightly pulling the tissue on paper.
9. Sein fabric to paper. You can, of course, just glue. But it seems to me that she is more reliable and aesthetic. I do not have a sewing machine, and I sew a manually seam "back needle."
We repeat the paragraphs 6-9 for each side. Do not forget to fold the corner!
The line should be close to the edge so that it is not visible in the picture when it is inserted into the frame. There is a small protrusion in the frame that will cover the edges of the picture. The line should be located in it.
10. When all parties are processed, we remove the pins and insert the picture in the frame.
Smooth, pulled panel is ready!
A source