Here is how it was. A very good friend asked me to make a fence, without a long time thinking I agreed. And that's what happened.
Purchased metal and decorative forging elements.
For columns, a profile tube 30x30 was taken, and for the crossbar 20x20.
I start from the columns, welding the plate.
I will give the right form.
Welding spire or tip.
Such an element chose in the center of sections.
Breeding vertical crossbars.
And to horizontal.
Then to finished columns.
Added elements into empty places of the fence parts.
The feet consists of two side parts (on one welded through the garage loops of the wicket), the rear (connects with the help of a bolted connection) and the front (on one side of the column, the other is attached to the bolts to the side partition)
Prepared parts of the wiring or doors, I do not know how more correctly.
Gothic watches.
Next welded it to the side part.
Another view.
Fence elements are ready for primer and painting.
I forgot to mention - to the bottom of the column welded perpendicular to the pieces of corner for easy installation.
Fourth part.
Here is the installed feet. Dimensions - 2900x3000 mm.
The manufacture was spent 12 hours with painting. Installed with each other in 1 hour. It remains to make a table and benches, but it is not much later. Strictly do not judge the first post. You can ask questions, I will answer them with pleasure.
A source