Funshui followers believe that the waterfall, albeit a small installed in the northwestern part of the room, can ensure well-being and prosperity in the house.
Room waterfall do it yourself - this is a decent alternative to expensive factory products, because it will turn out completely unique and will cost relatively cheap.
Home waterfall
You will need
- 1 clay stand with a diameter of 35 cm
- 1 clay stand with a diameter of 18 cm
- 1 clay stand with a diameter of 15 cm
- 3 clay coasters with a diameter of 10 cm
- 1 clay pot with a diameter of 15 cm
- 1 clay pot with a diameter of 10 cm
- Pump for indoor fountains
- Hose for pump
- Liquid Silicone
- paint
- Decor (stones, plants)
PROGRESS
- Processing paint from the spray largest stand diameter. This should be done for additional moisture resistance, as clay is a fairly porous material.
- Zami in water all containers for about an hour. Thanks to this trick, it will be easier to drill holes.
- Breed a hole in a stand with a diameter of 18 cm on the thickness of the hose, the edges of the processing file.
- One of the little stands have laid edges from 4 sides to drain the water. In the rest, do only 2 such recesses.
- In the pot in a diameter of 15 cm, you also make 4 recesses on the edge and the hole in the bottom.
- Attach water supply hose to the pump.
- Pot with a diameter of 15 cm inverting upside down and lower the widest stand. Hose Side, stretching it into the recess on the edge of the pot, and pull through the hole in the center.
- From above installing a stand with a diameter of 18 cm.
- Refrigeration excess of the hose, and the hole is treated with liquid silicone.
- The little pot also set up the bottom, and from above is one of the smallest plates.
- The lowest tier of the waterfall will consist of two small stands installed on one to another.
- Decorate fountain with stones and plants.
- Beauty! Do not forget only from time to time to change water.
A source