The summer holiday season is already open, but if you do not have your manga and smokehouse, we propose to find out how from two old gas cylinders to do them. The photo report with detailed explanations is waiting for you further.
The first thing from the cylinders were cut the valves that were not unscrewed.
Then the cylinders were filled with water, which stood in them day.
The mangon-smokehouse consists of a smoke generator and directly the manga himself. The smoke generator is a cylinder crucified in the form of a 50-centimeter flask.
At the top of the flask made a hole for the imaging and the lid.
The same is done in the main cylinder.
Next take the corner and drill holes in it, it will serve us with a grate.
In the Mangal itself, we make feeds on one side and holes on the other side. This is necessary to install skewers.
The damper for ponds.
Further, a welder is taken for business. It welds the loops, corners and a paveled lid into the smoke generator.
So the smoke generator looks like.
We prepare a manbon for dusting with a generator and an exhaust pipe.
I joke (the quality of welding in the photo leaves much to be desired, but the welder is not a professional at all).
Next weld the handles and legs.
Now it remains to bring a brazier in a human look. To do this, carefully cleaned it with an iron brush, flatten the seams with a grinder, degrease and cover the heat-resistant paint
That's what we get in the end. For smoking in the smoke generator, coals are bred, they are put on a steel cup with a damp pinch. The product is put on the grille in the brass. The pinch heats up, begins to smoke and smoke the product. The dampers are adjusting the process (intensity of the decline, the amount of smoke, etc.).
a source