We draw the imitation of the fuel stained glass with your own hands.
Almost every Master, who worked in the era of Modern, to one degree or another showed interest in the metal as a material for its work. Metal, including gold and silver, were often combined with other materials, such as ivory, wood, enamel and glass, which created a whimsical game of various surfaces. Stained-glass windows made by Tiffany technique, but less labor-intensive method - this is a filler stained glass window, imitation Tiffany:
It is no secret that if for a large size of stained glass windows - for example, in interior doors or windows, use the usual acrylic outline, the very relief that masters of the technician of the point-to-point technicians are like, ready-made works like a children's picture, artificially handicrafts, Whatever serious motive you have chosen for your painting. But it is easy to prepare the contour - imitation of Tiffany lead partitions. For this we need:.
Need: 50 ml. PVA glue suitable for gluing porcelain and glass; Black mascara - 20-30 ml., Silver (aluminum powder) - about 30-40 grams. The contour paint is created in this way - we take a small glass jar, pour the PVA glue into it, add a black mascara, mix and in the process of stirring we sweep the silver. According to the consistency, the paint thus obtained should resemble liquid powder sour cream.
Immediately, I note - if in the process of applying a bulk contour on the glass, the paint in the bank thickens, then adding a certain amount of warm water and a little black carcass (for the desired color), it will return to the state you need.
The contour formed by such homemade paint will be stable to stay on the glass, it will be similar to lead gaskets, connecting the elements of the classic stained glass. Moreover, you can improvise with a width of the contour when it is applied - this will give your stainedure originality. So, we are equipped with a squirrel or a column brush and proceed to the drawing of the circuit - it should turn out to be volumetric (convex) sufficiently, so do not save on the paint, but it is necessary to apply it carefully and neatly. In the process of creating a bulk contour, it is required to periodically sew paint, because Lighter particles of silver start to accumulate on its surface. Do not pull with contour work - the longer your paint will stand, the more its color will change, which means that the monotony of contour lines will be lost.
After drawing a stained glass circuit - 3 hours will wait for a complete drying of the paint. When the contour of drying and paint for the fill is already cooked, it's time before proceeding to stained glass staining, make sure that the glass sheet is strictly horizontal - any, even insignificant, the skew will cause drainage and thickening the paint layer at the lowest point of the painted fragment.
Arming a round large brush (squirrel or column), we recruit a large amount of paint and apply it to the specified fragments of stained glass. In this matter, the main thing is not to cross the contour border and completely pour each of the fragments of the paint of a certain color. If you hit the paint to the contour itself - nothing terrible, on the contrary - it is even good, because Fully eliminates any non-crushed areas near the contour. Burn with the advent of air bubbles - follow their appearance and quickly remove them with the movement of the brush. Having completed the color, we carry out a pause of 3-4 hours - we give paint to completely dry.
The next step is to re-draw contour. Try to repeat the previous contour lines, apply paint as abundantly as at the first drawing circuit. Now you are bothering to be confident in complete elimination of any irregularities and flaws. Another stage of work - after 2-3 hours, after drying the infused circuit.
At the end of the work on the stained glass window, it is necessary to apply 3-4 layers of transparent nitroquart, covering the entire surface of the glass with a thin layer. This measure will protect the drawing from scratches and moisture, will extend its service life. Nitrolac is best to apply not a brush, but a spray, withstanding before each new layer for at least 10 minutes. For drying the previous layer.
Work on the creation of stained glass is completed - you only need to insert it into the frame. Such a drawing stained glass service will serve you at least 10 years.
Several ways of cooking stained paint:
The first way. NITROLAK NC-218 (can be used 222 or 2141), 647th solvent and oil paints for artwork. Pour in a jar of about a third of nitroleak, add a solvent (about 40% of the amount of nitrolac), mix until the composition is similar to water. Then we enter a drop (the size of the pea) of artistic paint, mix, add more paints if the color is not enough in the area (the paints will need up to 10% of the amount of nitrolac). As a result, we get a well-spreading colored varnish, which is perfect for filling the stained glass pattern.
The second way. It takes a light glue BF-2, acetone, soluble in alcohol paint (you can use a paste of ballpoint pens). In a glass jar, we pour glue, we dilute it with acetone at a ratio of 1: 1, mix and add paint until the color of the desired saturation is obtained.
Third way. It will take gelatin, warm water, dry dyes for x / b, woolen or silk fabrics. About 6 gr. Gelatin needs to be divorced in 200 grams. Warm water, mix. Separately, in warm water, dilute dry paints. In a new glass jar, fill a little water solution with gelatin, add the required amount of paint solution, mix. After applying this paint for stained glass windows and drying it, it will be necessary to cover the pattern with colorless nitrole. Stained glass paints, it is necessary to mix exclusively in glass dishes of small capacity - as from under children's nutrition jar.
This and other stained glass facilities described Abdyuzhanov Rustam in the article http://www.rmnt.ru/story/interior/260923.htm.
![]() | ![]() |
A source