You are waiting for options from cardboard, wood and pipes.
How to make a crawler of cardboard with your own hands
What do you need
- Low cardboard box (for example, the upper part of the packaging from under shoes);
- ruler or measuring tape;
- handle, felt-tip or pencil;
- thick cardboard;
- stationery knife;
- glue.
How to do Cogtetchochka
Measure the length and width of the side of the box.
Note on a separate piece of cardboard a strip by removed standards.
Cut the resulting item with the help of a stationery knife.
Attach this strip to the cardboard, circle and cut out. Similarly, prepare a few more dozen items.
Slit two strips between themselves and insert into the box.
Lubricate glue the next strip and attach to the previous one. Continue to connect the details thus.
Fill the entire box with the connected stripes. For reliability, you can glue them to its bottom and walls.
What else there are options
Such a scratchop can be given an unusual form, as in this master class:Here they offer to make a tower from cardboard for a cat:
The frame of this device is made of cardboard, and the surface for sharpening - from a thick rope:
How to make a brake from the pipe with your own hands
What do you need
- PVC pipe;
- a piece of wood;
- felt-tip pen, pencil or pen;
- Round wooden billet;
- the cloth;
- scissors;
- glue-spray;
- glue gun;
- electrolovik;
- drill;
- screws;
- sisal rope or jute;
- pipe plug;
- acetone is optional;
- rag or cotton disk - optional;
- Aerosol paint is optional.
How to do Cogtetchochka
Put the pipe to a piece of wood and circle from the inside.
Circle a round billet on the fabric, moving away from the edge of several centimeters. Cut the circle from the fabric and enclosure to them with a fixing spray. On the sides and rear secure hot glue.
Cut with a round item circled on a piece of wood. Screw its screws to the round base. You can do it in the center or side.
Mark the dots on the pipe for screws, drill holes and screw the pipe to the wooden part.
Put on top of the plug. The authors of the master class at the end paint its aerosol paint. If you want to do the same, first wipe the plug with acetone.
Attach the rope tip to the pipe with the glue gun.
Wrap the entire pipe to the rope plug, periodically lubricating hot glue.
If you wish, remove the plug, paint, dry and put on the pipe again.
What else there are options
The pipe to the base can be attached with metal corners, as in this video: