Wooden fences for berry shrubs I'm already tired of doing. Wooden stakes quickly rot, and again it is necessary to redo. Water pipes rust. But polypropylene - plastic for water pipes - it seems like corrosion does not take.
Plastic plumbing pipes are quite budget material, especially if you have residues after installing the water pipeline. I have already used them for the manufacture of garden furniture - it turned out perfectly! Such a pipe and can be replaced with a wooden timber. Make a fence only from the polypropylene tube is quite simple, but the pipe relative to non-corrugated trees is much more expensive. Immediately an offer arises: stakes made from pipes, and crossbars - from the same non-corrupt rules. So that the fence is like a pretty, wood need to cover (paint) with something - paint or terraced oil. This will make them more resistant to the harsh suburban climate.
I will cover the wood with terraced oil, because it is in my farm. Last year, I tried to cover the kitchen knife knobs with Borma oil - the coating perfectly lasted for more than a year, although the mother-in-law regularly knives.
Cooking details and cook pipes
For a start, I cleared unstage boards with a bararter with a petal nozzle. Even it better on the street: dust when grinding is just worth the post. After the Bulgarian walked at the skewer of P80, then there was a terraced color of the "Cherry" color.
Danish oil, which I will use, is a mixture of tung oil and other natural oils with the addition of urethane resins. Oil is designed specifically for processing terraces, garden furniture, etc. The composition includes UV filters that allow you to preserve the natural color of wood. Protects wood from burnout in the sun. Applied by the usual kitchen sponge. At temperatures below + 20 ° C, the oil dries for a long time, almost a day.
The second fencing, smaller, made a clapboard from trimming, which is a little sidewall, so that the oil fell smaller. I put it again with a sponge - now the colors of the "Walnut".
For the first fence, the legs made from a polypropylene tube with a diameter of 32 mm. Height legs - 80 cm.
So that the water is not recruited in the pipe, welded from the top side of the plug.
The fence turned out to be collapsible and convenient for transportation.
Installation of fence
The first fence I collected on the screws, so I simply install it around the currant bush as a box. I do scrap a hole in the ground and carefully scoring the fence leg.
Installed the first fence. The height above the ground is 50 cm, the feet of the leg - 30 cm. Square fence - 100 per 100 cm.
Installation of collapsible fence
To install the fence exactly, you will need scrap, ax, roulette and level. The second fence is entirely collapsible, the boards are connected to the legs with clips. The legs are made of a pipe with a diameter of 25 mm.
We collect a fence and install it in place. Again scrap, we make holes in a depth of 25-30 cm and insert the legs in them. By level, align each side of the fence.
The leg is easily clogged into the ground with an ax or hammer.
The fence is installed and delights the eye. Its height is 45 cm, the shutback of the leg is 30 cm, the form is a square 75 to 75 cm.
Estimation for fence
Here I bring exemplary rates for spare parts 1 pc. If you buy parts specifically for support, then 1 fence for the price will be released about 450 rubles. But I repeat: I wanted to use the remnants of the materials.- Polypropylene tube, 4 m, with a diameter of 32 mm - 380 rubles.
- Polypropylene tube, 4 m, with a diameter of 25 mm - 250 rubles.
- Clips, 25 mm - 5 rubles / pcs.
- Cap, 25 mm - 10 rub. / PC.
- Clip, 32 mm - 7 rubles / pcs.
- Plug, 32 mm - 15 rubles / pcs.
Fencing only from plastic pipes on clips
The fence can be made entirely of plastic pipes. It is easily going and disassembled. Pipes hold clips.
If you have more spare parts after installing the water pipeline and heating, you can make fencing and according to this scheme. Watch the video on the NEMO NEMON channel and repeat: