The size of the backpack is about 22 cm x 30 cm.
To work, you will need:
- one Motch red and black thread (acrylic, 200 g. / 333 m);
- Hook: 4 mm;
- 2 buttons more and 2 buttons are smaller.
Knitting density: 16 fail = 10 cm; 24 rows = 10 cm. To obtain the required knitting density, use the appropriate hook.
Note: When switching to a thread of another color, do not cut the working thread, but simply continue to knit another thread of another color. Red threads need to be bought a small tangle for parallel knitting.
Reduction:
VP - air loop;
SBS - a column without Nakid;
CH - a column with Nakud;
Y - Ubavel (from two columns to connect one without Nakid);
The front of.
Row 1 (front side): Knit red thread 21 VP, I will try to the second loop from the hook and in each next; Rotate - 20 fails.
Series 2: 1 VP, 2 fails in the next loop, I will try to each column to the last, 2 fails in the last column; Rotate - 22 fails.
Rows 3-8: repeat the 2nd row; Rotate - 34 failures.
Rows 9-24: 1 VP, IBB to each column; turn.
A number 25: 1 VP, U, IPP to the next 9 columns, change the thread on black, I will try on the next 12 columns, change the thread on the red (attach the auxiliary ball of red threads), I will try to the next 9 columns, y; Rotate - 20 injection with red thread and 12 injection black.
Row 26: 1 VP, y, 7 fails, change the thread on black, 14 fails, change the thread, I will fail in the following 7 columns, y; Rotate - 16 sc2 red and 14 injection black thread.
A number 27: 1 VP, U, IPP to the next 5 columns, change the thread, 16 blackout, change the thread, IPP to the next 5 columns, y; Rotate - 12 sc2 red and 16 black.
Row 28: 1 VP, U, UBB to the following 3 columns, change the thread, 18 injection black thread, change the thread, fail to be the following 3 columns, y; Rotate - 8 bumps of red and 18 injection black.
Row 29: 1 VP, U, ISP, change the thread, I will climb into the next 20 columns, change the thread, 1 fail, y; Rotate - 4 brought red and 20 black.
A number of 30: 1 VP, y, change the thread, 20 sc2 black, change the thread, y, change the thread; Rotate - 2 sc2 red and 20 scary black.
Row 31: Continue to knit black thread, 1 VP, Y, UBB to the next 18 columns, y; Rotate - 20 injection black thread.
Row 32: 1 VP, IPP to each column; turn.
Row 33: 1 VP, U, IPF to the last 2 columns, y, turn - 18 fails.
Rows 34-36: repeat the 33rd row; Turn - 12 fails.
Row 37: Repeat the 32nd row; Do not turn.
The binding of the front.
On the front side to continue black thread, 2 ISPs in the last column of the 37th row, it is too uniformly before the start of red columns, change the thread, I will be uniformly until the first row, 3 fails in the 1st column of the 1st row, IPP to each column, 3 TBIs in the last column of the 1st row, it is too easy to start the edge before the start of the black columns, change the thread, to be uniformly to the end, the connecting loop to the first loop. Secure thread and trim.
Rear end.
Knit as anterior part of 37 rows, turn.
The folding part of the backpack.
Row 38: 1 VP, I will try to each column for the front wall loops: Rotate - 12 failures.
Rows 39-42: 1 VP, IBB to each column; turn.
Row 43: 1 VP, IPP to each column for the rear wall of the loop; turn.
Row 44: 1 VP, 2 TBI to the next column, ISP to the following 10 columns, 2 fails in the last column; Rotate - 14 fails.
Rows 45 and 46: 1 VP, repeat 44 row; Rotate - 18 fails.
Series 47: 1 VP, 2 fails in the next column, ISP to the next 5 columns, 1 VP, skip one column, ISP to the next 4 columns, 1 VP, skip one column, ISP to the next 5 columns, 2 fails to the last column; Rotate - 18 failures and 2 buttercups from air loops.
Row 48: 1 VP, IPP to the next 7 columns, ISP in a loop, four failures, ISP to another pettitsa, 7 columns without Nakid; Rotate - 20 fails.
Row 49: 1 VP, U, IPP to each column to the last 2-columns, y; Rotate - 18 fails.
Rows 50-52: 1 VP, repeat the 49th row; Turn - 12 fails.
Row 53: 1 VP, ISP in each column, the thread is not fixed.
Rear strapping.
Reinstall on the front side as well as the front part.
Decorations on the front.
Black separation strip: you can embroider with stitches with a needle, and you can cross the hook along the entire front.
Spots (6 parts).
Row 1: knit black thread, 3 VP, combine into the ring, 3 VP (as the first CH), 8 CH in the ring, connecting loop to the first CH. Secure thread, leave about 20 cm threads for sewing. Sew spots to the front.
Bottom belts.
Right belt.
Row 1: Attach the black thread to the 3rd column of the 3rd row of the back on the front side, the fails, another 3 fails in the following 3 columns of the same row; Rotate - 4 failures.
A number 2: 1 VP, 4 fails, turn.
Rows 3-6: repeat the 2nd row, turn.
A number 7: 6 VP, skip all the columns of the sixth row, the connecting loop in the last column (loop of 6 air loops. Fit thread and trim.
Left belt.
Row 1: Attach the black thread to the 19th column of the 3rd row of the part on the front side, ISP, another 3 fails in the following columns of the same row, turn - 4 failures.
A number 2: 1 VP, 4 fails, turn.
Rows 3-6: repeat the 2nd row, turn.
A number 7: 6 VP, connecting loop to the last column. Secure thread and trim.
Top belts.
Row 1: Attach the black thread to the 4th column of the 35th row, IBB and 7 more fails; Rotate - 8 SBS.
Row 2: 1 VP, ISP in each column, turn. Do not fix the thread.
Separation of belts:
Right belt:
Row 3: 1 VP, TBF to the following 4 columns; Rotate - 4 failures.
Rows 4-55: repeat the 3rd row; turn.
A row 56: 1 VP, ISP to the next 2 columns, mark with a marker, ISP to the following 2 columns; turn.
Rows 57-68: repeat the 3rd row; turn.
Row 69: 1 VP, ISP to the next column, 2 VP, skip the following 2 columns, ISP to the last column; Rotate - 2 failures and a loover.
A number 70: 1 VP, IPP to the next column, 2 fails in a loop, I will try to the last column; Rotate - 4 failures.
Rows 71-75: 1 VP, IPP to the end of the row, turn.
Row 76: repeat the 69th row; turn.
Row 77: repeat the 70th row; turn.
Rows 78-82: 1 VP, IPP to the end of the row; turn.
Row 83: 1 VP, twice; Rotate - 2 fails.
Row 84: 1 VP, W. Secure thread and trim.
Left belt:
Row 3: On the front side to attach a black thread to the 5th column of the 2nd row, ISP, and another 3 fails; Rotate - 4 failures.
Rows 4-84: 1 VP, repeat the knitting rows 4 - 84, as for the right belt.
Sew small buttons for the eyes. Send big buttons for belts in places marked with markers. Put buttons in the loop.