To this master class you will need:
- water-soluble marker;
- dairy tone fabric, satin or cotton 2 cuts 40 * 50 and for oblique bey;
- sewing machine;
- threads;
- 100K filler.
1. Transfer the drawing to the cloth with a water-soluble marker,
On the other side, the sketch is attached to the mirror, we translate to the lumen.
2. On the napkin itself, it is necessary to highlight the vertical and horizontal, as guides, you can start the marker.
Lines in the center we translate only for a quarter, the rest continues.
3. Use the filler of the Sinyppon 100ku. Lush face up.
4. We descend, small works can be designed by pins.
5. We start to stew in a free move.
Gradually drain parallel lines, you can at the usual go.
6. Separate feathers from the border with the dipstone edges with two lines with a distance of 3 mm. Border fill in parallel lines 4-5 mm
A little line should go out for the drawing. After all the line is sealed, we pass the line on the most fester markup.
7. To remove a water-soluble marker, the work is soaked in water room temperature, wrap in a towel with a towel, and we are dried.
8. With an indent of 2 mm, cut the surplus, as in the photo.
9. We use oblique beyk, edging 3-4 mm. We are twisted so as not to appear the relief of the border.
10. Seer, at the point of the compound of the Festrians, stop the folds of the fold, as in the photo:
We help the pin, pass on.
11. Such a residue must be left to connect the edging.
You can decompose with the help of a pin, you can notice, connect the Kant on the oblique.
So it should happen, start:
12. We make cuts. As if cut off the fold, so that there is a few more in the end with the front side.
13. We are placed on the front side of Kant:
We like with an inside on your hands, lay folding, as in the photo. Stitch length tends to 1 mm.
And photo of finished work.