Usually everyone strives to teach me, but today I decided to share personal experiences, and the right occasion just turned up. Recently mastered the new technology for himself, referred to as the rest of the civilized world by "Brash".
What kind of beast is? Let's try to figure out.
one.
The literal translation from the Anglitsky does not disclose absolutely no sense, and if in Nashinsky, then under this intricate phrase, it means a special type of wood processing, and here it lies the most interesting.
Braching pursues the only goal - to give a tree a certain collapse of antiquity, artificially to form it, as if to refine. As a result, the wood acquires aristocratic features, and sometimes it gets at all, without exaggeration, the second life.
The main attractiveness of the brush is the simplicity, availability and high decorative properties of this method.
And now we go from words to business.
Let's start with the fact that we got a stove in a very indecent state from the previous owners, and if we put a hand on the heart, then the appearance was completely disgusting. I do not know what plans were built there on the account of this structure, but for some reason the work began was not brought to the end, so the responsible mission was all my weight on my thieves.
2.
The encouraged laying of a long corulent eye, and very much wanted to solve this problem, if possible, the smallest blood, preferably without the use of anesthesia and surgical intervention.
Dear and complex technological methods, for known reasons, we have noted immediately, and here it came to help the brushing.
Next I will try to describe everything I have done to achieve the goal. I want to note that such a lesson is available not only by coarse male strength, but also gentle female hands, able to keep a small drill or light bulgarian. Nothing global in my plans was not included, it was planned only to make two shelves and scril them into the right places, only and everything!
In order for the tree to seem old and look like a piece of sunken ship, it is not necessary to dive deeply, just to properly treat the most ordinary board, and any wood will be born. The chip is that each tree consists of bitch and fibers that are solid and softer, while strictly alternate. Here and we need to work with a soft layer.
3.
Another advantage - any lumber is suitable and what it will be low-quality, suspothe, than it will be more chips, holes and other defects, the better.
four.
Following this rule, I walked the same curve and sucking a fortyport from the insides of my barn, thank God, it is all built from such an illiquid, so I have been provided with material for creativity for many years.
five.
We take a drill, and even better a grinder, we cling to her a metal brush-nozzle. To begin with, it is better to take a coarse grater, and then go to the softer, then mercilessly bite in the woody.
6.
Almost at your eyes with a bitchboard will begin to occur amazing metamorphosis. Metal brush pulls soft layers, leaving all the hardest.
7.
The main thing, try to work along the fibers, and not across, otherwise, all your work will go to the pump.
eight.
Always loved intricate patterns on the tree, and the presence of bitch is a special luxury and what they are more, the stronger I adore such a tree.
Any joiner will declare that it is a non-lumber, and it is suitable, except for the firebox of the fireplace, but I think otherwise - from this can get out if not alive Pinocchio, then something is a masterpiece, that's for sure!
nine.
Gradually detected texture of a tree. The farther, those working carefully. Do not rush to go around, moving through the fibers where you need to be born deeper or vice versa, we leave everything as it is. In short, we work as an artist with a brush. Hence the name, "Brush" - brush.
Do not forget about safety technician, work better in glasses and gloves, and even better, in the respirator.
10.
After you decide that finally achieved the desired result, you need to slightly work out the sandpaper, spending and you can proceed to the next, no less exciting stage - to the sea.
Do not remove the sandpaper, she will still come in handy.
eleven.
In construction stores, a great many varieties of Beans or Morleets are sold, and in this matter the Barin. Depending on your preferences, the product can purchase any shade, from the bright maple or walnut, to a mahogany or oak. I chose the color of "mocha" - the darkest out of the available.
12.
We take a soft brush and cover the product by the Morilka, there is nothing complicated in it, the veil, like a tinted water. You can restrict ourselves to one layer or process in several stages.
On your eyes there is another magic - the tree acquires a pronounced shade, the texture is revealed, whole patterns are spilled out of the fibers, and the knots, like frozen galaxies, do not break the eye, but that's not all!
13.
A plate need to dry well, but as long as she dries, rest, we are going with thoughts and get ready for a new battle for aesthetics!
Although the product is already pleased with the eye, it takes once again to take the sandpaper and again show artistic abilities.
Carefully manually cleaned part of the upper sea layer, while there are those places where a person's hand can be reached. The texture manifests even more - internal, the deepest part of the fibers remains dark, in places almost black, and the initial shades of the light tree are returned to the surface. The main thing is not to rearrange!
fourteen.
Then cover the product with varnish, and again, it all depends on your imagination. You can apply a colorless varnish, and I used the lacquer under the red tree. After each layer, we are prettier and enjoy the result.
While our shelf dries, we return to a long-suffering stove (I already smeared the seams).
fifteen.
We really wanted to bust the furnace with beautiful tie, natural stone or at a thin end with some patched cafeter. Then he forced himself to descend from heaven to the ground and paid attention to the cheaper artificial stone, then on decorative bricks, but these options were not affordable.
The decision came by itself. What can be decorative and naturally lively brickwork? Only it is the most real brickwork!
It remains only to smear the cracks, bring the wall in order, paint the seams and decorate slightly.
sixteen.
Forged iron pieces, they were attracted, on which a drain pipe under the roof was sometime.
I cleaned the glands from rust, Schlifanlane and screwed them to the furnace as the police station.
17.
It turned out such an improvised fireplace regiment.
eighteen.
For complete harmony, something was lacking, and we decided to get rid of one part of the plaster.
nineteen.
It remains to make the last barcode - to collect all our design into a single whole, decorate forged metal and stylish old.
The result is achieved without visible costs, it turned out quite an appetizing interior!
twenty.
This method can be applied in the manufacture of other original furniture.
My plans - Napoleonic, In the future: Wardrobe, Buffet, Sofa, Truma, Frame, Controck, Secretary and Maaalny Dog ...
Stop, little dog made in another way!
Posted by: ankor_21