What a needlewoman would not like to sew a bra do it yourself? And although, at first glance, it seems quite complicated and impracticable, but it is completely wrong. Amy Mas Chapenen decided to convince you, which offers its master class on the tail of the bra with his own hands.
After all the items of the product are carved, they should be built. First of all, it is necessary to connect the main part of the bra with lining, stitching them along the edge.
In this case, the product has a lining that will enhance almost all having seams in the product.
After the lining is sewn to the main part from the wrong side, all the details should be turned out and try well.
Then you need to flash the main part from the front side, fixing the lining on the main part of the bra.
We begin to sew from the left cup, connecting the edges of the lower edge of the cup and the edge of the excavation for it.
Please note how to hold both parts during the crosslinking process.
The turn behind the right cup, the crosslinking of which begins with the axillary part.
When the line is already approaching the edge, carefully simplify the remaining parts in order to have time to correct their tension for the complete coincidence of the edges.
In addition, when you sew the cups into place, it should be borne in mind that stitching speed should be reduced at those points when the fabrics begin to gather.
For the first time it will be quite difficult, since the speed is difficult to adjust during the process itself. But after you understand what we are talking about, you must have everything.
This is what the future product looks like after both cups are sewn into place.
a source