Handicap cabinet with your own hands: Subtleties and nuances of work

From sheets of plasterboard can not be made not only perfectly even ceilings, walls and niches. Plasterboard cabinets are an excellent solution for a small room or kitchen. Infinite design capabilities in combination with relative cheapness - these are the main advantages of this material. You can save on the purchase of frame furniture and make interior unique.

We make cabinets from drywall do it yourself: all subtleties and nuances

For the manufacture of plasterboard cabinets, elementary skills of working with this material, metal profile and fastening elements, putty, primer, paint for finishing finish are required.

How to make a cabinet made of drywall do it yourself

If you do not know how your future drywall cabinet looks like, the photo on the Internet can be the beginning of your imagination. You can make an angular, linear or built-in drywall cabinet, as well as a wardrobe of plasterboard. The material allows us to design the furniture that will fit well into any room. Measuring the room, or rather, the place where you plan to install a wardrobe, draw it a scheme with all sizes. Pay attention to the distribution of loads on the surface of the plasterboard. If we are talking about a large shelf for large things, refer to it transverse structural elements from the profile.

How to make a frame

As a rule, plasterboard are attached to the ceiling or wall. If a drywall cabinet is made with their own hands, usually use the entire existing room height. Therefore, you first need to prepare the surface of the walls and ceilings for fastening the elements cut from GCL. The guide profile is attached to walls and ceilings with a dowel. If the wall surface is not stone, and the wooden, the screws can be used for attachment. After that, at a distance of 500 mm, the suspensions are located apart. They are attached to the vertical rack profile. Horizontal framework elements provide additional rigidity of the entire design. They are connected to the steel profile with the help of special fasteners, which in the people are called crabs. At the stage of the frame device, the profile for the shelves, drawers, if you decide that they will also be plasterboard.

In places of laying profile on the floor, you must attach a special shock-absorbing tape. It is necessary so that the vibrations from the floor are not transmitted to the structural elements of the cabinet.

If you are going to make a built-in highlighted drywall cabinet, it is necessary to provide subsequent placement of wires and luminaires at the framework of the framework of the framework. Holes for lamps are made by a knife manually or with an electrolybiz. In addition, you need to attach all guides and hinges for doors if you are planning a wardrobe from drywall.

Technology Crack Overall

It is very simple. For work, you need a screw for metal 25 mm long. They should be screwed every 200 mm so that the hat is deepened into the material not more than 1 mm. Sheets of plasterboard can only be mounted from the outside, and you can also from the inside of your cabinet. Usually used sheets with a thickness of 12 mm. But if the cabinet is designed for heavy items, you can take thicker sheets. For the edges to be smooth, treat them with the edge planer.

Cracking frame plasterboard

You can measure the length of the leaf to accurately. It will turn out to be a flat line, which should be made with a knife at the beginning and at the end of the place for cutting. List to put on the edge of the table, so that the battle line slightly protrudes over the edge. Slightly hit the palm over the speaker. The sheet should be broken through the planned line. Paper can be cut by the stationery knife.

Making a cabinet made of plasterboard

Cutting the frame, place the joints in the middle of the vertical profile, then they will be almost imperceptible after the surface is plastered.

To make drywall cabinets with smooth corners, use a metal corner, plastering mesh or reinforcing paper. So the angles will be protected from destruction.

Cracking frame plasterboard

What will your drywall cabinet look like

The finished product as a result may look different. The easiest wardrobe is a drywall cabinet with open shelves. In this case, after the cutting of the frame, the surface is putty, it is painted either with self-adhesive wallpaper. The cabinet is ready. It is convenient to use it in the kitchen for storing dishes, bulk products, billets for the winter. The cabinet will become not only a place for storing anything, but also a full element of the decor. Buy beautiful tanks for bulk products and blanks, or tie the cans on the covers a pieces of bright fabric (for example, the same from which your kitchen tablecloth or curtains are sewn). It turns out beautifully, original and quite inexpensive.

Cabinet compartment made of plasterboard

Want to make a wardrobe from drywall? The technology is the same, but note that the depth of the design should be at least 0.6 m. The door is inserted into the grooves when all the seams are already embedded.

Built-in drywall cabinet - comfortable and inexpensive furniture. If it is located in the kitchen, it is better to use moisture-resistant plasterboard. Cabinets are fixed close to the walls of the room, besides, the back wall may not be plasterboard, but the wall of your room or kitchen. And this is the savings of the material, and therefore your money.

Cabinet made of plasterboard in the kitchen

Standard finish, the same as when working with any plasterboard surfaces. You put off the finished composition all irregularities and angles, raise the finish putty. By the way, the shelves that are attached in a wardrobe of drywall can be from chipboard and fix on the walls of the cabinet using fasteners for furniture. If you use these shelves, before installing them you need to paint the entire wardrobe.