I do not know how I used to live when I didn't know about this method of repairing plastics, but after I learned that I grabbed the soda with a superclaim: how much things were thrown in vain!
If the nursed soda broke down with the superclaim will come to the rescue. The combination of these two cheap substances gives a stronger connection.
And this is our broken thing today
Refine. First, easy fixation of moving parts
Tightly connect and keep
Spring from above Soda
Abundant wetting super glue
On the other hand, similarly
Apply from above soda
So you need to repeat several times, it will be very firmly.
Glue-soda-glue soda.
Our hero is renovated
Now it will break, most likely hook
But the fact that I reinforced yesterday is a motors of the washer. Rusted, scratch.
Because The chassis is smeared - it had to be cut. I smeared, cleaned contacts, brushes. Collected and sealed back with glue soda.
We repair the monitor of soda!
The inner sleeve (according to which the monitor "drives" with the slope horizontally) partially collapsed in the place of attachment to the rack. I do not know what was the idea of engineers, but on 2 screws, it is holding, without a small, 7th kilogram display.
Responsed with meat! For treatment, either a donor, or to fix the rack "tightly", or something somewhere to pull out. Epoxy will not take, as it is plastic.
Shards just throw away, they will only interfere with and fall asleep damaged soda places
Kapa / applied sufficient for wetting the entire volume of soda cyanoacrylate in the people of "superclas".
UPD glue should be not a gel, but a liquid "classic". Polymerization occurs instantly, the mixture solidifies completely after 2-3s.
"Patch" is very durable, it is more complicated than the original plastic. It remains to polish and drill holes for screws.
Everyone is here
A source