In this workshop, I would like to show how from the old but well-preserved leather jacket, wearing the soul does not lie, but it does not rise to throw a hand, you can sew a new combination with a fashionable Basque. Curl before the update:
For alterations, you will need:
- piece of fabric;
- lining fabric;
- Dublerin;
- glue "moment";
- Thread for a syduction;
- Machine needles for sewing skin;
- Teflon foot;
- buttons, scissors, crayons, pins, stem, line, etc.
The prototype of the new jacket served this model, but the back will be with an average seam and coquette.
The basket and the middle of the transfer in the updated jacket will be from the fabric.
To make patterns of a new jacket, use the patterns of the jacket with embossed seams.
We make changes to the backs of the back: add a coquetka, blacksmith new embossed seams, adding a jacket to edit the jacket (new lines are shown in red), cutting along the lines, swaying for folds and for small waves - the back of the back is ready.
We make changes to the pattern: Having drawn a new embossed seam from the shoulder, to transfer the bad fading there, they add another relief, add an exhaust to the bottom, cut off the bottom and cutting and swaying the part to the fold and small waves - the Basque is ready.
Ready patterns backs.
Finished patterns.
Patches of the sleeves leave unchanged.
Dispairs a jacket, smoothing the skin details through dry fabric. The middle seam on the back does not fall apart.
I cut the details of the skin with the same allowance, trying to put them so that they do not fall on the holes of the previous seams.
From the fabric, we cut the average details of the transfer 4 pcs (2 internal fittings), 4 parts of the transmission Basque (internal and top) and backbashes (the internal backbast of the back is cut out of the lining.)
On the lining lay out the patterns, putting the coquetka and the middle of the back to the spin of the fabric, leaving the fold on the fold in 1 cm. Intermediate detail of the backrest and translate with the side, making a sweep instead of a seam. Burlap pockets cut out of lining.
From Dublerin, we cut the average details of the transfer. We glue all 4 midnings (internal and top). On the details of the Baskets, we lay the backbone missions, on the middle items in the middle.
Getting sewing.
On the intermediate part of the back on control marks, we apply the glue points and connect with the middle of the back to the control marks.
We apply a thin strip of glue in the intervals between the control marks, gluing the parts on the allowance, steal on the typewriter, the stitch length is 3-3.5 mm.
We also connect the second intermediate part and side details of the back.
For intermediate details, also sew lateral parts.
Sutting down seams, glit and revealed from the front side (the skin is always ironing only through the fabric).
We tighten with the front side to the edge and at a distance of 7 mm from the edge or on the width of the paw.
When you cover the coquetka with the back, it is stepping up, it is tightened by a sweating of a coquette.
We fasten the side and shoulder seams with paper clips and stepping, seams are irrigating, we glue the allowances with glue.
Also, covering the elbow and the front seams of the sleeves, stepping, the allowances are trimmed, gluing glue.
Having invested the sleeves in the armor, neatly large stitches incentive, the clips did not risk the clips, as the allowances were not the same) trying by the seam not to get, as traces from punctures remain on the skin. Flats at the top of the oket attaching a motoker (a strip of a synthetic hybecue with a length of 18 cm 3 cm wide).
Step by the prugium, carefully remove the backbone, ottuzhev.
Stilling and irrigating the allowance of the collar of the rack, slanting to the shoulder allowance and stack with a leather item, to allow the neck of the neck of the backrest to make the scatter and start the battery on the average part of the transmission.
Locking in places Snacking on the waist I knock off the hammer to become flat.
Step outdocks on lining details. Stacking and irrigating the seams, step with a coquette, we estimate the fold in the middle of the middle to freedom and is removed, we remove the uphill.
Stepping the sutures of the sleeves, leaving in one elbow seam an unstable area of 20 cm long for turning the jacket.
Step shoulder and side seams, cover the sleeves. When stepping with a fitting with a lining insert the loop of the skin (removed from the jacket) in the center of the back.
Sicking the detail of the pocket leaflet details, folding in half the inside inside, start.
Expanding stool one edge, to the spin of rounded.
Outless, carry out the static line at a distance of 2 cm from the fold.
We translate the input line into the pocket on the front side of the Basque and from it to the side line we carry out the second line at a distance of 1.5 cm. The flow line is done in short by 8 mm, taking into account the rounding of the pocket leaflet.
We press the leaf to the front side of the Basque and stepping.
We rush to the bag puzzle face to face and in the wrong way we lay the brawl exactly in the first.
Cutting a little battery so as not to get on the second line. We press the second part of the burlap pocket face to face, stepping on the wrong one, having finished the line by the mark.
Gently cut the entrance to the pocket, not reaching the end of the lines by 1 mm. We turn over the burlap pockets on the wrong one and weiss.
I flex a triangle on burlap and drain. I spoil burlap pockets and stepping.
Fix the pocket on the upper allowance. Pocket leaves fix the line.
Similarly, perform the second pocket.
The lower edge of the sleeves is handled by a reset by the slip. We measure the width along the bottom edge and at a distance of 4 cm from the edge. We fold the furniture to face to face, mark the dimensions carry out the line stepping and weakening the allowance.
Having put in the sleeve face to face, aligning the suture of the wrapper with the elbow suture of the sleeve, while holding the clips, stepping. We turn around the garment, carry out a line from the edge at a distance of 5 cm, cut off too much.
Stilling the Baskets with the Basque backrest on the side seams, weaning the seams. Scholov face to face an upper and inner basque, connect along the bottom and front edge, cutting up to 0.5 cm on the corners of the maternity and, by typing on the front side, sweeping and revealing, we are tightened with double snapping.
Having laid the folds, desire.
Face to face Stepping a ride with a riding leather, first stead the waist to the corners of the seam on the basque, cutting and stepping the upper ends. We press the lining and steal exactly by seam.
By connecting the face to the face with the top (the Basket lies inside between the lining and riding), stepping around the neck and the front edge. Lining sleeve wear onto the wrapper and stool, glue the sleeve to the sleeve.
At the top point of the Okat, we fasten the lining with the skin.
Soak the jacket through the hole in the sleeve.
Let's pull out the front seam and we are revealed. We tighten on the waist and tighten the front part.
Outless, delete all the marks except the middle of the pass.
Along the middle of the pass, put a small mark for the sewing buttons. We sew small buttons from above, in the bottom I sew the button slightly more. Remove the remaining mark.
The remaining non-stared elbow seam on the lining is stepping into the edge. And we are interested in the finished product.
Our update is ready.
A source