Since there are 3 children in our family, and the 2nd schoolchildren, then there was a need for an additional desk, because On one closely.
Trace on shopping and simplified from their prices. Yes, and the quality is terrible. to order will be even more expensive. We decided to do themselves, my experience was small. I used to collect even a changing table and a kitchen, though it was a long time ago.
My wife sketched such a drawing, I crossed it a little more, whatever it would be clear where what part and began to calculate.
That's what I had, like a simple design, and mistakes still endowed: (((hurried and did not check, as in the proverb about seven times it will die ... So I ask not to repeat the sizes if anyone is interested.
Then I downloaded the program "Master" for cutting and realized that one sheet of chipboard is not placed, so I decided not to bother with an organomet for drawers and make the bottom of the boxes too from the chipboard. Checked again the place left, I will make a shelf in the hall.
We went to order sawy and facades. The edge decided also not to glue himself, the thick it does not take, and the thin will be off with time from the table top. I ordered 1 ml. Tolecchina. Since the table will stand in the nursery, then the colors are appropriate.
Week passed and here he came to our desk. It remains to collect :)))
For assembly, you will need a confirmable drill, loop milling cutter, magnetic nozzle for self-tapping screws, hexagon for configmatics, drill, electric lobby and grinding.
Electrolovka and grinders are optional, but if I have accumulated with sizes, then without them.
We collect boxes, the tallest work.
We screw the guides (telescopic)
Cabinets for drawers (or how are they correctly called?)
And here it is the first mistake did not order the strut, made from waste, they still will not be visible.
We are placing and screwing the guides until it is convenient to do.
We connect the board, which will give the stiffness of the structure and at the same time will keep the side part.
screw the handles on the boxes
We glue the facades on double-sided tape and screw on the screws on the reverse side.
Children will have in their secret box with a clavicle :))))
The stub for the wires, cut out with the help of a jigsaw, but if there is no jigsaw and a lot of holes and a drill.
He began to collect the top and again an error, for a long time could not understand what's wrong, why did the middle rack made the side of the side. I had to shorten the upper, twisted in general :)))
We screw the top to the tabletop, and the tabletop through the struts to the lockers.
Cutting the holes under the loop and fasten, started hanging the facades and again an error. The middle rack was needed to do double, because Loops overhead, it was necessary to buy others, but again twisted. Holes closer to the edge and adjustment pulled out.
Each extender
I screwed the top against the wall, so that the whole design would not move, and it was calmer on the soul.
When the table began to collect, our favorite Ukraine arranged to us Blackout, and the lessons as it was necessary to do, so I bought this self-adhesive LED ribbon and connected it directly to the battery of the uninterrupted person, grabs for a long time. Only I had to throw it at the time, because Divided.
Ready! It seems to be good. Although the wife is calculated with the top, the height of the shelf can be safely made 10 cm less.
And so with a ribbon when the light is turned off. Even brighter than with lamps.
Well, the bonus is such a shelf for books in the hall over the 3rd desk
The price of the question is 14 thousand.
Of course, it was possible to make it cheaper, guides the simple, bottom of the boxes from the organity, the edge to glue himself, would probably fit on 1 sheet, but it was so easier for me.
By time, if the light did not turn off, it would be possible to collect over the weekend.
A source