Thanks to Yandex, which brings me a "letters of happiness" :) It is me, and I have you! In my life it is necessary to share!
Are you interested in embroidery ribbons and do not know how to make a print? I found a magnificent master class from Svetlana Gerasimova Well, I suggest you familiarize yourself with the skill of work further ... |
I cut a bit of a little more format sheet A3 (the printer usually allows you to make a stock of about 2 cm).
At first I cut the edge of the fabric, now I leave it ... She does not interfere with me. Who will have reliability, you can remove it.
Then we excite the prepared pieces of fabric.
Bitker is a cotton-paper technical tissue. We have it sold in stores with inexpensive fabrics (Type of Satsev and Boszya) ..
Then I open a blank sheet Word ... (Sorry for the fact that the name of the program in Russian)
Click "File", I choose "Page Parameters"
Install the landscape or book list
Then choose the desired format
Click "OK"
Now on a blank sheet copy the desired picture. I have a swan in this case.
Increase the size of the picture by pulling it over the right lower corner
I love to work when the A3 sheet is open by 50% (this can be set in the percentage window).
I often use the "cross-cutting position of the picture", then it is easily moving along the sheet with a mouse
Do not forget to leave 2 cm around the edges !!!! For job design. So this picture looks like a Vordsky sheet in a computer
Now you can go to the printer with our fabric sheet.
I have a little secret: I my husband and I thought about him - in the hole you insert a thing here, the husband calls her "nickname" ... and in this case we can work with the printer's open lid.
"What is it for?" - you ask. It is for the convenience of printing. In this case, it can be seen, did not catch the fabric at the beginning of the print.
Now the most pleasant thing is to click the "Print" button.
Print began, but here the main thing is not to view how the binds went.
If she went under all the teeth, then you can breathe and wait until the print comes out all, if at least some clove stuck, then you just need to raise the "nickname" and the cartridge will stop ....
Now carefully correct the fabric ...
We returned our magic thing in place ....
And the seal continued !!!
Now look so that our sheet does not wed up again into the printer. This also happens!
Adjust and wait for the result!
HOORAY!!!! Print is ready! You can take ribbons and embroider! And if there is a desire, at first something to cut something, you first can and for paint or pencils to take!
I wish you success!
A source