Many at home has an old sofa, which is a pity to throw away, because the sofa frame is still intact, the springs did not quit, the locks work, but the appearance is no longer because of the dying upholstery. I don't want to order a sofa drawing in that case, because the old sofa is not so valuable. For resuscitation of the old sofa, the best option is to drag the sofa with your own hands.
Drawing a sofa with your own hands: Materials
- Fabric for furniture hawk (tapestry or velor, 7 robes, width 1.5 meters)
- Dense fabric 1 email and 2 meter long
- Film 3 square meters
- Metal cruciform sheets, 32 pieces
- Universal glue
- One sheet of plywood 4 millimeter thick
- Staples for hand stapler with a length of 14 millimeters
- Two woolen blankets
- 3 meters of steel galvanized wire, with a diameter of 1.6 millimeters
- Sintepon or foam
- Palace sizes 1.5 to 2 meters
- Kapron thread
- Self 5 * 40
Drawing a sofa with your own hands: technology
Disassemble completely sofa.
We are preparing a fabric for flour of furniture (in this case velor).
Viewing the sofa frame, numerate all the details.
If necessary, replace the part of the framework.
We collect the sofa frame, we welt the parts by universal glue.
We are tightening the clamp.
Fix with metal cruciform sheets.
From plywood on old templates, cut out the details that will be attached to the frame in the future.
Krepim Phaneru to the frame. Initially, the frames are missing by universal glue, then apply Faneur and Fresh braces with a stapler.
Fresh woolen blanket.
Fix the springs with a stapler, so that they do not shift.
From steel galvanized wire, we make a bracket with a length of 2 cm.
Fix the springs using homemade brackets.
Fix in advance tied threads for the upper part of the spring canvase.
By the size of the upper part of the spring canvase, we cut the palace with a 2-5 cm in each side.
Having bent the palace, fix cloves, so that with further work the Palace did not displaced.
Then, in a circle, we flash the caproic thread, step seam 5 cm.
Take the second blanket and fasten it with a five-cm falcon.
We stretch out the patterns in advance with the help of templates and stitched case, and fastened from the reverse side to the main framework.
We disassemble the main sofa frame, in order to re-glue them to securely.
We glue the tipped angles, labeling with universal glue, when assembling the cocenter, we check perpendicularity.
We collect all the details of the main framework.
Breeping to the front of the fabric for the furniture.
In the inverted state to the frame with the help of self-samples, the mechanism is secured.
Thinking the sofa soda. At first, on both sides, secure a palp fabric.
With the help of syntheps, you attach volume.
We stretch the case
Freak to the sofa
On the back of the sofa is a fasten tissue fabric.
Fresh wooden armrests.
The sofa is ready.
A source