So they are advised to pass thick seams using a fixture for thick seams or, for example, a piece of cardboard.
The beginning of the seam.
To align the foot, put a gasket under it (for example, a cardboard) and scatter from the edge of the fabric.
Passing through thick seam:
1. Schedule until you reach a thick seam and the foot will not start climbing. Place the gasket from behind the paws to align it.
2. Move in a thick seam until the paw starts to descend. To align the leg, place the gasket ahead of it. Move on until the paw is completely on the gasket. Delete the gasket and continue work.
On the usual, household sewing machine is always difficult to hed up (in any way, even keeping the bending) jeans, since where there is a double seam - with a bend it turns out a lot of jeans layers and the machine skips lines. Simple know-how, how to avoid it under the cut:
Schedule as usual when your foot will take up on the thickening, put the same thickness in the chess order, that's a piece that cut off or strit the pad from the same layers. When the foot already captures a thick place, lower the needle, remove the substrate.
a source