We have jeans-cock perfect colors! Great sitting on the hips.
So, we will need:
-flared jeans;
-sholder;
-scissors;
-Today pins;
- either soap;
-sewing machine;
-polelock;
- reinforced and reinforced
-Sew needles measuring 90-110;
-iron
To begin with, we need:
- Expand the side and external seams, to the level of knees (override the finishing line from the front side, then override the line itself and overlock)
Then, you need to resort a line on the bottom of the pants. My jeans are very long, so I just cut off the bottom.
Then, the sides of the sides need a number of centimeters. Cooking Niza Jeans, in the finished form, I need 35 cm. But the front side must have been used. You need to remove the same number of centimeters, on both sides, on both sides. The front side of me is 16 cm wide at the bottom. We carry out a line, bottom-up, coming on no, in the area of the knees
Next, measure the centimeter for the allowance and cut off excess
We do the same with the rear pant
Then, we spawn the side cuts with pins - perpendicular to the cut.
We put in the sewing machine with a needle, size 90-110. Let's refuel the reinforced strings
We stitched a stitch with a length of 3.5mm, retreating 1 cm from the edge, (first sew the inner sides and overlocate sections)
We make a finishing line in the face of 0.1-0.2 cm from the edge. Theaten, sew the sides
Weeping seams and measure jeans - make sure that everything is fine. And proceed to the processing of Niza jeans. To do this: twice we add a shed by 1.5 cm, fixing the pins perpendicular to the bottom, we deposit a line by 1.2 cm from the edge, the stitch width of 3.5 mm
Wall and ready!
A source