Today I will tell you how I create all your favorite earrings with tassels.
In my opinion, this is not a difficult task, but judge for yourself. We will do these earrings
For this we need threads. You can use viscose or silk. It is possible to try and polyester, but you have to look for brilliant threads, as mostly polyester sold matte, which is not suitable for us. Polyester I like that it does not have to disappear. In no case will not be cotton threads, as they do not shine and be confused.
We need any cardboard, a little more width than we want to make a brush.
We begin evenly, but not very tightly wet the threads on the cardboard.
The most important thing is to wind both tassels evenly. If you are not sure of your eyelash, consider the number of turns.
Now we will need other threads. It is better if it is a nylon and polyester, which coincides in color, as the viscose is too low and not suitable for this purpose.
We tie our tassels very hard.
On the other hand, from the nodules with sharp scissors make a cut.
After cutting the threads, we obtain this is such Abrakadabra. Do not be scared :)
Boil the kettle and keep over the ferry for a few minutes the resulting brushes, from time to time pulling them with their hands.
In the end, it should be like this. We take very sharp scissors and rant tips.
Here you need a certain skill. If it turned out not very smoothly, do not worry, correct already in the finished product.
That's all we need to build earrings.
I blur the ring of Pina and told it through the formed looting of the tassel. Colecko Pina is closed by the rounds.
I put on the pins first the caps of the terminivists, flexing the PIN by 90 degrees, cut off with laying, leaving about 8-10 mm and form a ring.
Do the same with the bead. And voila - we collect everything into one earrings.
If the tips of the tassels turned out uneven or greater length than you would like, even once, ride scissors.
All creative success! Send photos of your masterpieces!
A source