This is the upper part of the vase, closer. Very bright sun.
Lower vase.
Now I will describe how and from what I created this.
She took for shape, old, heavy, glass ceiling, glasses and plates for the neck and stand. Lubricated the shape of the Vaseline (bought in a pharmacy) and with enthusiasm, narrowing the huge amount of newspapers, prepared the PVA, and the water, took the case. The result you see. I made some kind of 16 layers, with a good drying. Cut in half, removed and glued.
It is already a vase is collected and glued to glue, the photo below. Impregnated with aqualak for wooden surfaces (liked).
Glue also liked in work. While not frozen well aligned with a wet finger, washed off with water. Thinks, it becomes similar to plastics.
This varnish is impregnation.
Further. It was drawn by such festers, you need to hide the place of gluing.
I brought the contour by a construction spa, a plastic bottle from naphtizin, I did not have another convenient inventory. She sucked and put on the glue PVA to lay the cockmagum, rudely squeezing with glue.
When the work was done, she sucked and was broken, it was time to close and smooth the irregularities that remained from the sticker newspapers, the shplanyow. As he managed and did it, culled. Again coated acrylic varnish in 2Sho. I use Lacra, it is elastic.
Beginning the prosculation of elements with the root crapbumagues. Painted the color of dairy chocolate.
Top walked in a peach. Covered PF-283 varnish. She dried up to turning and finger caused a bronze powder on the tops. When the lacquer, once again covered it, so that the bronze did not lose its color and did not oxidize. Acrylic varnish of this powder, not comrade.
That's what happened. Then painted the spheres in the main color, light cream. Applied cracker 739-740. And here I was waiting for me a problem that I had to overcome steady. Craquelur in all four spheres turned out to be different, from small to large. Although the thickness of the application and time controlled clearly. In addition, on the upper sphere, the second layer of collaborate is not led and cavity formed. After the grout, it all got out. Guard!!!
I had to redo it. I saved the vegetable oil and the sticky layer, I safely removed, though it demanded not a little time, the oil was washed "Ferry", degreased and caused cracker.
The work was saved, but the craklers turned out to be bigger.
Applied, using special vessels Palita, on the contour from the shovel.
She spoiled from a cold china flower, leaves, bows.
And it took up decorated as the mind will make up. Printed the decor on the gel "moment". He diagnosed acrylic varnish.
The photo is not high quality, but you can catch the point.
Filled the emptiness between the colors and smoothed the edges of the leaflets, with the help of the "Titan" glue. 3D lacquer - just regretted. After many experiments with adhesives and sealants, "Titan" turned out to be the hardest while drying !!! All other sealants, including the "moment" moving and elastic.
Blucked bows and contours of the "Decola" on glass and ceramics, from hand caused a small pattern.
Well, so enough. Now lacquering.
While covered only five layers of acrylic glossy varnish, but this is not the limit. Lacrification continues!
Here on this photo, the color is closer to the resulting one.
Unfortunately, photographed inside could not. Have to believe the word. Ipt the impregnation and painted the bronze paint spray. Vase is not designed under water. I will try to build decorative flowers for it.
So little better can be seen.
Filling varnish.
Gilding.
Floor leg.
a source