House hanger. Wood

Bracked hands to do something useful. To somehow take this itching, it was decided to make a hanger for outerwear. There will be 25 photos.

For 50 UAH. (approx. $ 6) Two boards with a thickness of 25 mm were purchased on the saw

One of them was drawn the contour of the trunk of a future tree

With the help of the electroll "Fiolent" cut off all unnecessary

I figured how it will look in a vertical position

From the remains of the first board and the second boards were made the other parts of the future hangers

Further sooooo dusty work

Well, oooooochine dusty, as a result of which the amazing patterns of wood appeared

First image of the future product

Bear brought Shaitan-liquid

And the work of Zakipel

Four layers of color "Mahagon" - Beauty Figure natural wood

All dirty and dusty work ended, moved to the apartment

Further, the same bear brought another capacity for 40 UAH. ($ 5) Water-based water-based lacquer

Begin. First layer

Without assistants, do not do. He is (assistant) - the main customer

The process goes. Three layers with breaks for 2 hours

A dozen nails of 200 mm were also purchased (shelter - 10 UAH.). Nails were successfully shortened to arbitrary unequal sizes, a little polished, as well as a thread on the thickness of the board was cut on them, i.e. - 25 mm

Then these most nails are so unaccompired by the drilled holes in the branches of the tree;

Here, actually, circled "hooks" in their places

Next proceed to the installation of our tree. Choose some not very necessary wall and forward - perforator to help

I almost forgot, pay attention to the wiring .... it was dumbfounded: at the top - Comrade 220th, below - a socket .... felt myself a sapper

For each branch, including the trunk, two holes in the wall.

Well, the first fitting

Second fitting

Third fitting and .....

We use ....))) I have everything, thanks for your attention

A source