Yes, yes, I want to talk exactly about this widespread material - garbage packages. But first look ...
Found these bags here
Speaks the author and artist Jassonchik (Moscow)
These bags used colored thin bags of T-shirts in which products are usually placed in stores or fruits in the markets. They are a variety of colors and shades. But since they are thin, they need to cut a wider-3.5 cm or even 4cm. And for finishing (flowers, leaves, etc.) we take a width of half the previous width of 1.75 cm and 2 cm.
Knitting packages must be matte (not transparent) and elastic (not rustling and rigid). You need to cut, folding these packages (several pieces) in a strip of 8-10 cm wide (it depends on the size of the packets), imposing a ruler or hard template. Mode scissors. It turns out at once a lot of rings. Connect them as knitting. For bands 2,5cm-hook 4mm. Then you can cut the sliced strips with a width of 2.5 cm along and get two strips with 1.25 cm wide for finishing.
To determine the thickness of the tape and, in general, whether this package is suitable for knitting, you need to connect the sample. For the sample of the bag, we recruit 22 V.P. And knit the pattern that we assume to tie a bag. To determine the width of the ribbon, knitting a few rows from the tape of different widths and select a suitable width. On the same sample, you can pick up the size of the hook and the density of knitting. Also you can pick up, to your already selected width of the package, the width of the ribbon from the package of another quality. After all, if you knit your bag of them, they must approach each other. At the same time you can see if they are different colors, as they look nearby and whether these colors are suitable for each other. Sometimes in one work can be used ribbons from packages of different quality and therefore different widths. It can be 2 cm, 2.5 cm, 3 cm, 3.5 cm and even 4cm. Sample from 22V.P. Maybe sometimes be very long. It depends on that. What do you pick up the tape, pattern, the size of the hook or colors. And if the tape from which you knit is very narrow, then for the sample you need to gain more air loops. If you knit some kind of finish, for example, flowers, balls, handles for the bag, then for them, too, need to knit samples. By sample, you can calculate how many loops you need to recruit, for example, for a handbag handle or for some kind of parts of the bag. Then, when the sample is no longer needed, it can be dissolved and use these threads in your knitting. This material allows it to use it repeatedly and does not spoil the type of knitting.
Bag gray flower
This bag is connected from the tapes wide -2.5 cm, the hook number 4, the ST B / NAC for the rear semide. Pattern "Zig-Zag". This is when in one place from one loop knit three, and in another (in this case, after 9 loops), three loops are obtained by Zig-knocked. Knit ring of that diameter, the size of which is equal to the diameter of your bag (I have 32 cm), without having reduced anything for 15 cm. Then we collect on the one hand, it turns out a circle with a hole inside, which can be closed or decorated, for example, a flower. I have-ring and buttons, lubricated st .B / NA. Tie the second the same circle and sew them together. And most importantly, this bag can be tied from threads. Why this bag is gray? Just tonal packages I did not find on sale, it would be easier with threads. It is necessary to give the name to this handbag, perhaps "gray flower". Even in the very gray days, life is beautiful!
Poppy Bartpet
Grid for shells for sale in business stores. It happens different types. We are suitable as in the photo. Cut the corner with scissors and leave only a circle. The circle has such puzzles, which do not allow the grid tightly falls on the bottom of the Rocket. They must be cut off a razor. We assign a circle from the grid and sew it in different places. I specifically sew the same ribbon cut from garbage bags. They are strong enough.
Now bend the circle as it looks like a plate and fix the pin. We measure the centimeter from one edge to another through the tip of the circle, where we whip it. We need to tie the item where Znight will be sewn. To have a painting of this detail, I put a foil on a cloth circle and pressed it to the edges of the circle. It turned out a detail of the bag that will need to be tied and, sewing a zipper, sew to a circle. We recruit a chain of black hinges, as I have a black lightning. If you sew white lightning, then you dial the chain white. Knit first in one direction from lightning, having reduced the pattern. Then knit the other side of the lightning. And in the place where the lightning will be inserted inserted a chain of air loops (the number of loops on both sides of the zipper should be the same). We connect the chain of air loops with the already bound half the part and continue to knit. Do not forget that a black cell should be on the second half of the white cell. The blasting is also done on the pattern that we did with the help of foil. Having finished knitting the item, we bind it two times with a black ribbon and sew the zipper.
We will continue. I forgot to write that the size of the circle in the grid is 31.5 cm. Now we have two parts connected. We rock the circle and item in which Lightning is sewn. In the place where the handle will be attached, insert the rings (I knit them with a black ribbon) between the circle and part. Pen will be inserted into these rings. We bind the st .b / N Navel black ribbon details., Capturing one loop on a circle and the other on the details. Thus, we connect the circle and this item with a zipper. Now we reinstall these details of Art. Used. Black ribbon and then we bind this last series of Art. Used. Ratchy step. Now you need to tie a handle handle. To do this, score a chain of air loops from the black ribbon the length of such what a handle should be. Now we are taking this chain from air loops in a circle of Art., And where it will be sewn to the rings along the edges of the handle with connecting columns, so that it is at the ends narrower. And these narrower ends of the handle will then be traded in the rings, which we inserted between the circle and the detail with zipper. I reduced the ends of the handle, since I had small rings. We bind the handle with a rachy step in addition to the place where it will be inserted into the rings. The knob is seated after the lining is.
Now knit flower-poppy. Ivying ribbons 1.25 cm wide (tape 2,5cm cut along the ribbon in half) and crochet number 1 (1mm). At first, I tied the MAC on the finished scheme. (see the photo) but as I needed poppies of different sizes and I wanted to make a little different center, I made a change in the scheme. So: from the gray polyethylene tape, we recruit a chain of 4 air loops and connect to the ring, 2v.p. For the lifting and knit into the ring of 11 semi-rolls with Nakud. Since the semi-solubular with Nakud (if you look at the top) 3 weaken, 2 front floors weiss the black ribbon-1 st. B / NA, * 1 V.P., 1 st. B / NAK to the next loop *. It turns out like a black gear edge. We stayed on a knitted gray center the rear free float. They knit the petals made of red polyethylene tape. The petals knit as indicated in the scheme. At first knit on each half of the 3 st. Then rotate knitting and on each loop knit 2 st with NAC. When the first petal tied, we turn out to be in the right corner of the petal. It must be attached to the center of the flower, i.e. To the gray semi-whip of which we knit poppy petals. We usually got used to counting sang forward in the course of knitting, but in this case, we count the third one from the beginning of knitting the first petal poppy. As if five back. So, we attach the right tip of the 1st petal of Poppy, having missed the two weed, to the 3rd floor of the gray center (counts back from the beginning of knitting the first petal) of the connecting loop. And in the same semi-one and the two missed weapons begin to knit the 2nd petal poppy. Then also knit 3-yi and 4th petals. Those. For each petal, we have 3 gray semi. This is a medium-sized flower.
Bag Spiral
Tied another bag of polyethylene garbage bags. I have long wanted to connect the "Spiral" pattern, but I, as always, made a change in the pattern. On plastic ribbons, in my opinion, the embossed pattern looks better, since the tape itself does not have a texture. Therefore, I knitted with a semi-brass with Nakud for the rear half. On the front side, a pigtail is obtained, which I knit the "Radi Step" pattern. In this bag, I used polyethylene ribbons from packages of different quality. Green and red packages are the thinnest packets. Fruits are usually pack in such packets-T-shirts. Green, they were the thinnest, 4cm width, red-3.5 cm, the remaining -2.5 cm. A rachy step with the front and back side of the bag tied up with a ribbon with a width of 1.75 cm, but the side side of the bag is linked with a ribbon 2.5 cm.
Evening bag
This time I really wanted to try it seems absolutely non-compatible-garbage bags and embroidery beads. In my opinion I did it. Tied an evening handbag from black bags and extended it with beads, glass and fuels. Size 35-19-10.
The embroidery of the beads in this material was even easier than the knitted fabric from the thread. Related bar is a ribbon lace (polyethylene tape 1 cm and a hook 1.25mm) is well holding the form and does not need to be lining a material. If the knitted material does not hold a form, then it is imposed on the gauze, tightened in the chamber. If the knitted material needs to be strengthened, then a dense gasket should be laid between the knitted material and gauze. After you have finished embroider. Cull your embroidery and the remaining gauze strings to pull, they are easily removed. It is necessary to use exactly gauze, and not some other material. Since other material will be difficult to remove from the inside.
Inside the bag will be sewn the circle cut out of the mesh for washing, the same as in the previous black and white bag with poppies. But to make the assembly under the embroidered plank, I did not knit a circle, but as if barrel. The width and height of the barrel is exactly the diameter of this circle, and at the top and bottom at 6cm (3 cm on each side) less. On the front side, we make 2 folds shifted to the right, and on the back-3 fold symmetrically. The sidewings of the bags knit (the width of the polyethylene tape is 2.5 cm and the 4mm hook) also, as in the black and white bag with poppies. For ribbon lace, the picture is taken (see photo), but I made small changes. At the beginning and the end of the plank, I knit almost a circle.
Bag tenderness
She graduated from a summer bag-basket. I called it "tenderness."
Patterns made of polyethylene tapes must necessarily be relief, as this thread is not volumetric, but rather flat. And the mistake of many is that they knit the usual st .B / NAC or especially Art. with NAC. These patterns look very carefully. It looks good st .b / Na, if you knit in a circle, not there and here. Therefore, carefully select the pattern to these polyethylene threads.
Blue dream bag
She finished her next bag. Bag large 52x29x17. 8 packs (30 lx30sht) went to it. Located with thin hooks 3mm, 2mm, and decoration made of leaves and colors-1,5mm. For the bottom, the fishing line was laid (I usually get it out through a row), and at the end 3 turns of this fishing line was laid (the diameter of the line 1,6mm). The line in 3 turns is laid on the edge of the bag, for better holding an oval shape.
I gave her a new name: "Blue Dream". I will try to remember how to knit, because between the beginning and end of the bag there was a break for several weeks. And I have a bad habit not to record as knitting and then it is difficult to remember.
The base of the bag knitted from the tapes with a width of 3.5 cm, the hook number 2 (the packages were thin). Bottom of Art. B / N, the fishing line was lost 1.5mm thick. At the end of oval 3 turns, the fishing line was taught by st .b / n. The main canvas knitted with semi-brass s / n for two rear arches, leaving one arc in front. When she finished knitting the whole bag again paved the line 3 turns and put them with st .b / n, and then a "rachy step". Behind the arc on the front side of the bag tied Pico Iz7 V.P.This and there are Makhrushki. The width of the tape was 2 cm for them, the hook number 1. The bells and leaves knitted from the tape with a width of 1.5 cm, the hook is still thinner. The bells are associated according to the scheme, but it has made a change in it, as in the flower scheme 6 petals, and in the living colors there are 5.This, I redo the scheme for 5 petals, i.e. Before knitting petals should be 30 st .b / n, and then as given in the scheme. Cherry flowers made up 5 petals as kegs (forgot what this loop is called) and inside the stamen from Pico 7 V.P. Here are the scheme of bells: http: //forum.knitting-info.ru/index.php? Showtopic = 52441 & ...
Bag beach
Its size is 49x43x22cm. New in neo-pen. They are made of two pairs of a diameter of 24.5 cm and 19cm. I knit them st .b / n. ribbon 2,5 cm wide. And then with the help of a needle and the same tape seam "Kozlik" connected.
A source