To sharpen claws - the natural need of a small predator. And it is useless to scold a hooligan for spoiled furniture, he will still find a way to support manicure in perfect condition. To save furniture safe, the owner will need a brazetchka for cats. You can choose to choose in the store, but you can make it yourself, considering all the wishes of your pet. For example, my cat does not like low brates. On purchased in the store, he did not pay any attention. And we decided to make a large bracelet. Our friends have a planned idea of such a scratchy:
You will need:
- 1. Sewer pipe 110mm, 2 meters long - 1 pcs
- 2. Rope with a diameter of 10mm-80 meters (we took the hemp)
- 3. Clay
- 4. Metal perforated tape
- 5. Clamp, diameter as a pipe-3 pcs.
From above and bottom of the pipe drills holes, diameter like a rope (1 cm).
We insert the rope into the hole, and tie the node (the node must be inside the pipe). So we fix the rope before winding onto the pipe.
Lubricate the pipe with glue, and begin to wind up the rope on the pipe. It is necessary to wink very tightly that there would be no gaps between the turns. I used this:
we wake up ....
... we wake up ...
And a bit more....
Ready! There should be such a thing:
At the bottom of the rope, as well as at the top, is fixed by the node. (Unfortunately, this moment I forgot to take a picture).
Then the brake must be attached to the wall. Bold a clamp and metal ribbon.
We remove the top part from the clamp (it is no longer needed for us), and crepary to the wall. Kogtetochka is attached to three clamps (at the top, in the middle, and below). We insert the brake to the clamps and attract the metal ribbon:
Fastening the screws (they are included with the clamps) like this:
It is necessary to attract very tightly, so that the quottechka did not move.
Everything! Our bratechka is ready!
You can reap the metal tape, top and bottom of the pipe. And you can make a shelf at the top, and your kisa will sleep safely.
A source