Old furniture often though looks crying, but the material from which it is made is still in good condition and it is unlikely that in the coming years will bring the owners. For this reason, many self-relocities are in no hurry to part with the Soviet walls, chairs or cabins, turn them and not in designer furniture, but in practical and necessary items. How did the needlewoman from the girlfriend, which were found in the country, where there is an old cabinet from the tremor.
The strange habit of our people to keep any trash to decades, transmitting him by inheritance does not always turn out to be so bad. As it turned out, the remnants of the once fashionable tremo, who found a young mistress in the attic of the cottage, can also be inspired to create a good-quality jacket, which there is a place in the hallway. Thille thinking, Angelina, so calling an amateur experiments, took up the tool and paint to embody their idea to life. As the girl decided to do everything quickly and without much costs, the materials for transformation used only those that were found in the country.
To begin with, it was necessary to remove accessories, glass doors and shelves, as well as remove the overhead plastic grooves, which moved the halves of the door. Then it was necessary to remove the paint layer, which is pretty degraded from many years of operation. This surface is not recommended to cover the authors of novate.ru right away, because all chips, cracks and irregularities will explicitly stand out and spoil appearance. Due to the fact that the grinding machine was not available in stock, the girl used a grinder with a special nozzle (a circle with sandpaper).
After grinding, all the surfaces and the inner part of the couch, the girl thoroughly cleaned from dust and began painting. The main color was chosen black matte paint on a water basis, which dries quickly and in its composition does not have toxic substances with a sharp smell.
Considering that the needlewoman decided to turn the tamba to a junk with a pouf, then for its creation, a piece of thick plywood was needed, to which the foam rubber and upholstered fabric will be fastened. But before this it should be cut in size and make holes at the desired points in order for the material and the foam rubber to secure with buttons. Simply put, make a carriage tie (capitone), which is used to decorate the furniture.
Since the thick foam rubber was not available, the inventive girl used thin, but in six layers. The top of which she made more than 10 cm on each side. This layer is easy to overlap thin cuts of foam rubber and consolidate it on the back of the base (plywood) with a furniture stapler.
After that, the pouf's seat remains only to be made using fabric. Given that the upholstery material or the tapesto was not found, the pantna from sports velor trousers went into move. This canvas was fixed in the same way as a cut of a foam rubber.
In order for the buttons to have the same appearance as the surface of the Pufa, Angelina covered their cloth and secured a strong ribbon from the opposite side. Prepared buttons trained through the holes, and the tape tips secured the stapler. After that, it was possible to install a soft part on the Tumba and securely fix it using drill and screws to facilitate the process and reliability of the structure.
Note: To make the seat created in a carriage tie technique, it looked more neat and last longer, the foam rubbed should be glued to a wooden surface using a special composition. And also before fixing the dense and strong upholstery fabric on a wooden basis, it should be smoothed by hand, forming the same and correct folds, not allowing distortion and deformations.
Those interested in how the process of transformation of the Soviet stand took place, you can watch a video that Angelina placed on its channel.