Made a bike son

Anonim

I decided to burn my bike here. tricycle. In those that are sold did not suit the fact that they have pedals on the front wheel, and on those that with a chain rear wheels are connected hard with pedals, without routine. Yes, and everyone can, so it's not interesting)

At first, the sizes from a three-wheeled bicycle that was used before was removed. Interested only the distance to the magnitude of the seat and pedals and the seat and the steering wheel.

The first detail did quickly. From the Tokar pipe found in a pile of scrap metal for ten minutes I pulled out a great rear axle to me, with landing places for bearings.

Made a bike son

The hulls for bearings were welded, a profile tube is welded to them, it's dressed on it a slightly larger size, all this with slots, pulling bolts to adjust the tension of the chain

Made a bike son

Then the frame was deposited from the thin-walled pipe.

Made a bike son

All work took about a month, TC was made during the main work.

Made a bike son

It turned out ease

Made a bike son

Pedals on the foregoing photo are simply not screwed, but in fact, everything is exactly.

Made a bike son

Weled fork. Of the exact same pipe as the frame. before that the pipe was construction forests)

Made a bike son

He welded the seat to the frame, it is also the fastening of the intermediate stars of the chain. The surrounding stars needed in order to make foot brakes. Manual, it seems to me that in 2.5 years it is very difficult. then there will be photos of all this mechanism

Made a bike son

The seat had to do. I did not find suitable size with the back. It was possible to buy some tricycle as a donor, but on them the seats are not very good.

Made a bike son

For ten minutes I lit it up. It would be better from the whole piece, but for some reason there was no such piece of metal

Immediately welded fasteners

Made a bike son

Bought a little spare parts. Front Wheel 14 ". Rear wheels 12" How it turned out to buy 12 "Wheels that are still a quest. Rubber on them in stores with shaft. No wheels no drives. Therefore, I bought a baby stroller and let her go to the Durban.

Made a bike son

I collect all this in a bunch. 120 centimeters of length ... despite the fact that the usual three-wheeled bike is 80. Farewell another 40 cm of the hallway ...

Made a bike son

The problem of such veau, that they should be periodically trying to try. And the children in the district are not observed. You have to go for your own. It seems like ..

Made a bike son

I do not like at all when the customer chooses the color of the finished product. And I wanted to paint the bike into a brown, slightly with a xerlycker, add pinstore, red with white ...

So far soil. First epoxy, then wet acrylic

Made a bike son

But with her son you will not argue ... I said to blue. I had to agree. Purchased paint, Subarovskaya, I don't remember the number, there are two hundred and something, or the Atlantic, or the Adriatic Blue.

Krasim

Made a bike son

It seems to be something like that, I thought worse. Although I chose it for almost an hour, revising the catalogs thirty

Made a bike son

began to collect.

Made a bike son

Yes, here is the wheel drive mechanism closer. One star on the rear axle, one on the pedals. In the middle of the rear wheel sleeve, another star is welded to her. It works as well as on the simplest two-wheeled bikes. The sleeve moves to hold the chain, the rear axle too

Made a bike son

It seems already something like. With strength no longer. I am withstanding. rolled. Smelted the problem, the rear wheels are tightly sitting on the axis, the diff is naturally no, turn it hard. One wheel made turning, now everything is fine.

Made a bike son

Another fitting showed that the child is very interested in the chain and it will definitely need to shove your fingers. The foot goes parallel to the chain and the panta is dumping not only from the bottom, as on normal bicycles and to the very top.

bought protection, at the same time and the headlight came out suitable

Made a bike son

the headlight was very successful with batteries in the case, no wires needed, and I just started thinking how to stretch them inside the frame

Made a bike son

Protection painted and installed

Made a bike son

already similar

Made a bike son

The seat is pulled in a nearby studio

Made a bike son

Purchased rooms. The numbers were lucky, found an old sample, those where the numbers and letters are still eclipsed

Made a bike son

In the finished form looks like this

Made a bike son

yet

Made a bike son

Today took home. Immediately got out the first problem. He does not exist to me in the car, I had to ask a friend on the universal

Made a bike son

Today they rode the first time in the area. I got out some more problems.

First, in crowded places, ride it is problematic, the Wagon is immediately going to a crowd of children, nozzles and crying, I want to be present, parents are grieved

Made a bike son

In fact, the bike is not as big as it seems.

When the child is smelted, the queue is arranged from those who want to ride. tested today probably to all the yard

Made a bike son

When you grow up, you can put the wheel-motor. Only the weight of the design will increase greatly. Dad trailer will need to buy.

Made a bike son

From this angle is bigger, but the main son is satisfied.

There was still such a problem, apparently not in vain on three-wheeled bikes, the ratchers are not provided. From the slides of the pedals are spinning, the child cannot turn them at such a speed and slows down on the asphalt of his legs. There are no such problems, and drives all the money. I feel there is a chance to get on painting some of the parked cars. Run behind him is now quick and age is not the age)

that's all. did not weigh, but in sensations kilograms 12-15

Made a bike son

A source

Read more