In this master class, I will show how fast and with a minimum amount of materials and accessories to sew a fashionable, lightweight, comfortable, soft bra for summer, and perhaps for a long-awaited marine cruise :)
We will need the following materials:
- durable elastic lace;
- Cotton linen knitwear (100% cotton).
Additionally:
- Regulators for straps - 2xcins;
- rings - 2 pieces;
- Clasp - 1 piece;
- scissors;
- threads;
- Portnovo chalk;
- Melo (pattern) I have it on a transparent film.
Everything :)
So let's go!
Decitation bodice from lace.
I always cut with absolute symmetry. Therefore, more lace leaves, rather than drawing not in the drawing.
We fold the part of the leaf by the front sides inside and coach on the overlock. For the tack of underwear, I try to use textured threads, especially for these purposes and intended.
Next, we prepare the striot part :)
The width of our fastener is 2 cm, therefore, the width of the lower part in the finished form will be 2 cm, it is just 2 stripes. We sew a size of 75 V, and the length will be 75-3cm, the fastener = 72 cm, taking into account the allowance (elastic tissue, we reduce the cm for better fit). Width 6 cm taking into account points.
Next, we take the cups to the bottom, folding the front sides inside, the pieces of the cups are a bit of the mustache.
At the same time, it is necessary to sew holders for straps with rings, we prepare them and straps themselves.
The width of the straps will be equal to 1 cm, and since we have polymatics, crumb stripes, as in the photo so that both colors are present on the front part.
That's what we did.
Straps length - 42 cm, holders - 8 cm, folded in half (already with a ring) - 4cm.
Drinking cups and holders.
"Watch" the bottom.
Pass.
But it looks like a starry. Do not forget to insert into the shuttle dark blue threads in the tone stripes :)
And here we are on the finish line. Drink straps and clasp.
Our bra is ready!
A pleasant and comfortable stay!
A source