It is easiest to throw it into the garbage, well, but you can do out of it ... the other, and if there are several burnt lamps accumulated, then you can go and .... repair.
If you at least once kept a soldering iron in your hands, then this article is for you.
You can turn on the daylight lamp to 30 watts, without a starter and throttle, with a small handkerchief removed from our economy lamp. At the same time, it will be lit instantly, when the voltage drops, will not "blink".
This lamp burns out in two ways:
The electronic circuit is burning
Glow spiral brave
To begin with, find out what happened:
Here is a housekeeper. Going down to screwdriver in places in the specified arrows (collected on latches)
It is necessary to disassemble it like this:
Turn off the flask:
We bite the power wires:
Nick the drips of the flasks (to make a decision to throw the flask or not)
I was not lucky, buried both spirals (for the first time in my considerable practice, usually alone, and when the scheme is burning). In general, if at least one flap burned out, if not, it is working, and the scheme burned down.
The working flask is debugged (up to the next burnt housekeeper) and then to the working circuit we cling the flask. So from several do 1, and maybe more (as lucky).
But the option of making a daylight lamp. You can connect, like a 6 watt lamp with a "Chinese" lantern (for example, I wrapped it with a green bottle, and the scheme hid in the burnt charger for the Nokia mobile phone and turned out to be a cool backlight for aquarium):
So 30 watt daylight lamp:
Yes, a writer with me ... .. Well, okay.
We solder four wires (not worth it):
which will go to the heat (immediately think about how and what will be mounted),
And two on the network plug, connect the lamp:
... in the outlet and here, it burns
Try but neatly voltage 220 volts are dangerous for life !!!
a source