• Homemade holders for threads and needles.
• Protection of embroidery on the frame.
• Original organization of the embroidery process.
Our inventive embroiderers invent and create helpers from the most unexpected materials. We will tell about a wonderful light, plastic, cheap and affordable material -
The heat-insulating pipe that can be bought now in any construction store and perfectly adapt to many of our embroidery needs.
• Organizers for
Embroidery
I wanted to make a convenient organizer, but could not find a suitable tourist rug or seal under parquet. Wandered at the shopping store and
I found such such a tube for the insulation of pipes.
Chopped short tubes
The desired length, cut them in half, stuck the carnations, sticked up the table
with colors icons in the middle, cut both sides of the attachment tubes
Thread. And that's what happened in the end:
The tube is similar made from Celofan
or some foam (I don't know exactly), pleased tightly, keeps well and
Carnations and needles cost about $ 2 per 1 meter.
pros Such organizers:
cheap, since spending only on the tube (from 1 tube can be made
8-10 Organizers of 50-60 colors each depending on the frequency
slots for threads), functionally (and threads you can hang and needles
shock), quickly and easily in manufacture (no need to
additional devices).
Organizers are narrow, occupy
There is little space, which is different to the pros.
Minuses: short-lived - I'm afraid that
The material from which the tube is done after a while, as probably any other material for any self-made organizer
There are such 4 organizers for Golden Kite.
• Embroidery protection on
frame
I use polypropylene pipes that are designed for
insulation of water pipes for
Embroidery protection (as well as for stinning needles, and as
"Parking").
They are in building materials
Very cheap, we have 38 rubles for 2 meters.
Cut off the pipe
Frames, cut along and put it:
I
Bought for the organizer insulation for pipes. Very pleased, thanks for
Idea. To its machine from "Sressy" to the frame with a size of 60x50 cm added a knob from the mop,
Wrapped insulating pipe.
By 60 cm153 symbols for embroidery Golden Kite are easily placed.
Stick into the pipe needles with the residue of threads during embroidery.
And for the following
Golden Kite process The same insulation for pipes put on top
Rama bar and received an extra room for needles. Now and all 200
Symbols are placed. And on the bottom plank - the protection of the fabric and the needle for
Released pins and needles.
In the process of embroidery, the frame is not
I turn over.
From the polypropylene tube on the upper crossbar of my self-made sofa machine - "Parking" for needles with
threads
Almost all embroidery supplies now I have under
hand on the machine.
• Original embroidery organization
That's how I am preparing a thread for embroidery of the GK. On the portno pins with balls, the prepared threads of the desired color (or blends of colors) are performed near the corresponding symbol.
Nights at once do not inspire a lot, in the process of embroidery of previous works
I realized that I was easier to "do" in the morning, after a cup of coffee before
departure to work or after one and a half hours of embroidery to eyes
rested.
Thread on the pin is not just hanging, but dressed
looped. That is why I use a pole with a ball, although initially
There was a thought on your organizer "stationary" pins.
How to hang a thread on the pins of the loop:
(click in the photo)
Algorithm Action: When
I need a thread, take out the pin - I remove the thread - I pull out one and two
(if the blend) - a light movement of the hand with a loop dressing the thread on the pin and
Stick it back. At the same time, the lowering threads thanks to the ball remain
in their places.
Working needles with threads in the process
Embroidery stick up near their symbol.
I now embroider a small dim, "butterflies and bamboo",
20x36 cm, 14 Aida. Flowers are a bit (it seems 25, characters 27), there are blends,
Organizer in a paper chinese set.
I, reading well, made a organizer from the pipe, cut it down at the bottom and put on his tabletop
"Dinosauric".
Threads pull out from a cardboard organiser and put on a loop on the pin.
Cardboard organizer with threads from a set lies in the package and removed a couple of times
per day to recharging the pipe.
I charge the organizer as needed.
- those colors you need a lot (see
By the number of passes in the set), these can immediately have 6-12 loop-lattices on
Pins.
- and which are few - those 2-3 threads or at all immediately 1 needle charged
And stuck.
And the threads do not chat and do not confuse, because short, and everything is at hand.
Since this embroidery dimensions of icons is not enough, I didn't really bother with the organization
location.
Blends are only 1 + 1. I launched them at the beginning of the chain of characters, then
Symbols go on the key, and at the end of the pipe 4 different badges for the tack.
On each icon sticking needles and pins on both sides, but they are located
often. And for more colors you can position the icons, but with
two sides are different. And cut off a larger.
Now I know how to organize a more complex process "Christmas
Village.
Only pins with ready-made blends on them !!!
For the idea of charging the thread looping on the pins a lot thank you to girls!
Bought itself polypropylene pipes when _Sveta_ Told us about their way to protect embroidery.
When embroidering the bouquet of Fujiko used the pipe on the top of the frame as a parkower for needles with the remains of the thread, and the bulk of the threads also remained on the cardboard organizers of the joint purchase set.
And now embroider with the system of blanks on the pins Smallinka His big
Golden Kite 541x995 for 200 characters with blend.
This way of organizing threads I accepted for myself after the year of the preparation and study of the people's
textbook, and after a year and a half of the embroidery of the GC with organizers of Paco (first by the method
By colors, then parking).
So: Our sticky-egg and pinch system
On organizers-parking lots of polypropylene pipes.
Paper strips with numbers and symbols are made in
Excel program.
The pipe is attached and at the same time laminate a wide simple transparent scotch.
Symbols are grouped by pictures - a proven way
Organization of two hundreds of Golden Kite characters.
Read more about Simols Classification System HERE.
Long polypropylene tube on frontal crossbar
Metal module Machine "Novik":
The process of filling the pipe is gradual, starting from the first ten
Symbols of the first sheet.
As soon as the new symbol occurs in the scheme, I get From the cutting folder Eastern I.
I am twice as clean symbol (6 blanks), or two parcels for Blend
I cut in pressure and collect 12 blanks on the pin and the cut from the symbol.
Here
The needle with a tail is stuck in the process.
All overlays on working organizers occurs in the process of
need.
Continued
And now on short pipe segments
on a special "Lestenka"
When the thread ends in the needle to remove the prepared Blend from the pin and conceive
needle - sec. business Everyone is close, symbols and numbers are visible.
Our pipes are an easy and affordable material from which you can make a lot of utility for the current process and use without worrying especially about its long-termness. After all, for the next embroidery, for another frame you can take a new comfortable insulating pipe.
A source