The vacation time has come, and many of us go on travel. The question of the preservation of our own savings becomes relevant. From the Soviet pioneer past, many still remember the pouses on the shorts and so on.
For storage of money, a soul handbag that is put on the waist under the clothes.
Draw the pattern. At the heart of the bag - a trapezium, the dimensions of which at the top 32 cm, from below, 24 cm, the height of 12.5 cm. From above, a rectangle with a zipper 22 cm wide is applied. Corners at the top are spinning with a round item below, at the bottom of the hand.
Since the bag should be as imperceptible as possible, for the front part, we choose the cloth of yellowish or beige color.
We will need the following materials:
- fabric for the front of the handbag;
- Fabric for lining;
- zipper;
- Wide gum;
- Pautinc;
- Adhesive Flizelin.
On the pattern add lock-zipper.
From the main fabric, lining fabrics and glue phlizelin, we cut the rectangles in size 23 by 12 cm.
Lining tissue strengthened phlizelin.
We put the lining face up and apply zipper to the bottom slice.
Top face down put the rectangle main tank
We rock and deposit using a paw for stitching lightning line.
We flexion on the face, weeping and laying two finishing lines, so we sewed zipper. It turned out to enter the pocket.
For the inner pocket, we cut a rectangle of 22 to 23 cm from the lining fabric. I cut a rectangle from a cape of 11 by 23 cm.
Lining bend in length. Inside insert a cage. We bind the iron. We apply marker marking with a water-soluble marker and we sneak through the outlined lines.
For the main part, we cut off rectangles from facial tissue, lining and adhesive fliesline with a size of 32 to 13 cm.
Lining strengthen Flizelin.
We fasten the facial tissue and the reinforced lining with a cob. We put markup and laying the lines on the applied lines - we are following the part.
We remove the marker line using a wet cotton disk. By the iron.
We combine the midpoints with a rectangular part with a zipper and a piece of lining (internal pocket). Cut up to a size of 22 by 12.5 cm. We deploy a line for dividing your pocket into two parts at a distance of 9 cm from the left cut. We deposit auxiliary line at a distance of 3 mm from the edge throughout the perimeter.
Weeping.
From the main steam canvase, cut the part - a trapezium with rounded edges. We plan median points.
With the help of a device for the formation of beaks (for 12 mm, you can take 9 mm), from the equity strip of 26 mm wide, we make fak.
On the main part impose a detail with lightning and we combine on the midpoints. We pave from above and below the auxiliary lines at a distance of 3 mm from the edge.
We take a rubber with a length of 60 cm (the length can be different depending on the size) and with the help of equity beek attach it to the main part, thereby closing the raw sections. Having retreated 1 mm from the edges of the beaks, laying the seams.
To process the outer edge, we cut the oblique bitter with a width of 3.8 cm and sew it, imposing on the face.
In the roundabilities of Baika wait. Condimate the bay inside out and lay the finishing line at a distance of 1 mm from the edge of the bey. Weeping.
The gum is additionally fixed on the main part.
It turned out such a bag "for money"
A source