Production of the contour on the glass with your own hands

Posted by: Irina Grigorieva

I learned to make contours on the glass by the method and error. This is especially necessary when there are no contours of suitable color.

These contours are opaque, I will continue experiments can and transparent will turn out.

Take the half-one acrylic interior varnish,

Rastel Latex

PVA glue,

And acrylic paint.

Prepare a jar with a wooden stick or needle and an empty container for the contour. The company Marabu is sold, but I leave and used, will always be useful ..

In the bank we pour all the ingredients first in the ratio of 1: 1 (I recommend starting from a teaspoon, because ingredients a lot)

They stirred to homogeneous mass ... and add paint to the desired color.

If the contour is needed to dilute dilute with varnish, if on the contrary, add a chatelacycle.

Then the simple needle is trying to apply the points and wait 5 minutes. (Check). If you are badly freezing, add varnish and pva. If liquid, then putty.

I did everything. I wish you success.

a source