When installing the door, windows or other construction work, do not do without the use of mounting foam. This is a popular tool in repair work very effectively and reliably fastens various building elements, but it is not easy to remove the remaining foam after construction, especially if we are already talking about the solidified material. Even if all the measures of protection against sealant were taken in advance, its particles can stay anywhere - on the floor, walls, doors, windows, clothes and hands. The question arises - how and what to wash the mounting foam at home?
How to remove fresh spots sealant from the door of the door, windows, floor
Fresh mounting foam can be eliminated best. Easier "hottam" to remove unnecessary residues than dropping already dried material. There are various ways to eliminate fresh spots:
- Removal with special solvents. Specially intended for removal of mounting foam solvents are sold in specialized stores.
- Mechanical removal. Still soft pieces of sealant can be removed from the surface of the wall, doors, floor or windows by any tool - a knife, spatula or blade. If a small amount of foam remains after removing, it is removed using a napkin or a vein moistened in a special fluid for washing the mounting pistols.
- Heated oil. If there is no solvent at hand, then drop fresh spots will help a proven method with oil. A piece of fabric moistened in a slightly heated oil, you can remove them from the door or floor.
- Any other household solvents. Frequently used in everyday life for removing varnish, White-alcohol, acetone, solvents for car paints are also suitable as a submitted means to remove.
- Vinegar. The usual table vinegar is suitable for removing fresh sealant residues from the surface of the tile. Soft foam flakes without much difficulty can be washed away from the tile if they are intensely lined with a napkin well-moistened with vinegar.
For metal door, the process of removing the mounting foam is somewhat simpler than with a wooden. If a variety of solvents were used to clean the wooden door, then immediately after rubbing, it is necessary to wash this section with soap water so that the aggressive solvent substances do not damage the paint coating.
Also using solvents can be cleaned with a mounting foam from clothing. If you do everything quickly, the fabric will not be damaged. After cleaning, clothing should be wrapped with a lot of washing powder.
Than laundering mounting foam from hand
In order not to have such questions, how to clean the mounting foam from the hands, it is better that in the process of construction work related to the use of this fund, hands were in thick leather gloves. If it still failed to avoid getting sealant in the hands, then it is possible to remove it with the help of such funds:
- Medical alcohol
- Petrol
- 3% vinegar solution
- Acetone.
You need a regular cotton swab to moisten one of these funds and gently wipe the skin of the hands. Then the hands need to rinse well under running water using a liquid soap, and be lit by children's cream.
There are other methods of removing sealant from hand.
- Using a salt salt. In a small basin poured warm water, add a teaspoon of salts, lowered their hands and hold them a bit in the salt solution.
- Soap water is suitable for fresh spots on hand. The warm soap solution lowers hands, for a faster effect, the residues of the foam can be lured with a sponge or washcloth.
- Preheated vegetable oil. The oil needs to be slightly warm and grate it areas with the remnants of the sealant. Then evaints foam plots to fall asleep with a small amount of washing powder, interfere with it and wash off the whole solution with hands with plenty of water.
How to remove dried assembly foam from various surfaces
Already hardened and dried foam remove completely from the surface quite problematic from the first time. The procedure for removing the solar stains will have to repeatedly repeat. With a metal, glass or stone surface, cleaning from lumps and stains occurs easier than from another material. In these cases, there are also its methods that will help solve the problem partially or completely.
- Simple mechanical rubbing. Using a piece of plastic or other material, which is harder than frozen foam and softer surface. This method is suitable for cleaning the metal door or coated with enamel paint batteries.
- Removal with dimexide. This is a proven experienced folk agent suitable for more delicate surfaces, such as plastic, linoleum, lacquer-covered tree. This cheap drug is universally sold in pharmacies. Dimexide softens the pieces of the ordered sealant and its residues are removed using a stupid knife, sponges, washcloths or toothbrushes.
- Special solvents to remove dried foam that are sold in building stores. When mechanical scraping does not help well, you can try to take advantage of these means.
Whatever funds had to take advantage of the remnants of the sealant - the occupation is tedious and not always productive, as I would like. Experienced builders use a protective film in the repair process and work in gloves and special clothing designed for construction work.
a source