In this article I want to show How can you make a good and simple dust collector (dust collector) from a conventional plastic pipe Literally in 5 minutes with your own hands.
Hi to all lovers of homemade! All the same plastic pipes, this is a versatile material for the manufacture of various homemakes or tools. More recently, in the previous article it was shown, as you can literally in 5 minutes Small clamps In today's article, we will continue this topic and show one of the options for the manufacture of a simple dust collector.
Very often, when repaired at home, you have to drill the walls and we all know how much dust from it. Or when the repair is completed, but still there is a need to drill the wall, for example, in order to be a picture, and that dust will not fall, we will make such a device. Making time will be required literally 5 minutes, and the finished result will serve you very much and very long!
Required materials and tools:
- a piece of plastic pipe;
- Saw (sawed by the usual handwheel for metal)
- cone drill;
- screwdriver;
- a piece of metal tube (took from anchor screws);
- package and rubber band;
- Adhesive gun.
Making a dust collector
First of all, it is necessary to cut off a piece of plastic pipe approximately more than the size of your palm, whatever it is conveniently lying in the hand. Press the pipe to cut off the tip of the pipe as shown in the photo below.
Next, using a conical drill (can be ordinary, but conical more convenient), the opening is a bit with a slope (as shown in the photo below). The slope is necessary in order to further put a metal tube at this opening at an angle of about 170 degrees.
Next, we insert the tube and wear a thermoclayer well.
Well, in fact, everything) It remains only to wear a bag and press it with a rubber band. Instead of a package you can use the attacks (sold in pharmacies).
Now we test this dust collector! To use it is very simple. We lean the cut-off part of the pipe to the wall at an angle, insert the drill to the tube and you can work. All dust that is formed when drilling through the pipe will be poured into the package. As the package is filling, you can change it to the new or simply pour the remnants of drilling to the trash can and continue repairs.
I recommend to watch a video clip on testing this dust collector.
Make this tool and yourself
As you can see to make this fixture is very simple, but it will bring a lot of benefit!
Thank you very much for your attention to the new homemade!
a source