With our step-by-step instruction, sew this glamorous dress with crossed straps on the forehead will not be much difficulty.
1/4
You will need:
Stretch Cool 2.00 M 140 cm wide for all sizes; 1 secret zipper 60 cm long and a special sewing machine foot for induction; braid, embroidered by beads, 3 cm width: sole. 36 - 65 cm, size. 38, 40 - 70 cm, size. 42 - 75 cm, size. 44 - 80 cm; Fliselin G 785; Threads for sewing.MOREOVER:
· Silk paper to translate patterns from the leaf of the pattern;· Pencil, paper scissors;· Santimeter tape, portno pins;
· Portnovsky chalk;
· Scissors for cutting and small handicraft scissors;
· Burda copy paper, gear wheel for translation patterns;
· Sewing machine needle, hand needle for sewing.
Recommended fabrics: Forms holding moldable fabrics.
Pattern dresses ...
... with black contests located on the sheet of the pattern D. Take the silk paper on the sheet of patterns and stick. Move the details of the patterns of your size on the appropriate contour lines and do not forget about marking and inscriptions. Cut pieces of paper pattern.The length of the waist is 65 cm.Size 36-44
Details 1-9 on the sheet of pattern D
Extra-Council:
The size of the dress is determined by the gripping of the chest (dimension 36 = 84 cm, sole. 38 = 88 cm, sole. 40 = 92 cm, sole. 42 = 96 cm, sole. 44 = 100 cm).Layout plan ...
... shows how to arrange the details of the paper pattern on the fabric. Details clap.
Stretch Cooker 140 cm
1 binding leaf 1x
2 Front Plot Skirt with Figure 1X
3 Plank 4x
4 bonding bay 2x
5 Rear Plot Skirt 2x
6 Top Sleeve 2x
7 Lock Sleeve 2x
8 Catching the neck transition with a fold of 1x
9 Cleaning the neck of the backrest 2x
Cutting
Fabric fold along in half the front side inside, aligning the edges. Details of a paper pattern. Verify the fabric according to the layout plan and stick. Around the details of the paper pattern with the help of a ruler and the Portnovo shame of the allowance: on the bottom of the bottom of the dress and sleeves - 4 cm, for all the other cuts and on the seams - 1.5 cm. Details do it on these lines.
Gasket
Fliselin fold along in half the adhesive side inside. Details of a paper pattern 3, 8 and 9 impose on the laying according to the layout plan and stick. For all sections of the parts, it is dropped by a width of 1.5 cm. Details Cut. The gasket is attached from the wrong side of the corresponding cut parts.
Seam lines and markup
Dubbed with a gasket Details Optell the front sides / in half the front side inside. Print paper pattern details. The contours of all parts of the pattern (seams and bottom line), as well as all the lines and transverse labels marked on the details and transverse labels on the wrong side of the cut parts using a gear wheel (cutter) and copy paper (see the manufacturer's instruction). The lines of the lower edges, the lines of alignment, folds and extracts, as well as line lines on the forehead, move onto the front side with large-pitched stitches.
Planks transfer
Duplicated gasket Detail of each plank impose on non-duplicated gasket item face face to face, longitudinal cuts. Swiss allowances Cut close to the line. Remove the bar, take the edges and affect. Planks Notify to the episodes in the alignment lines so that the allowances at the ends of the slats protruded for the marked lines of the chest pulp, the allowances at the ends of the slats cut to a width of 5 mm.
Chestdocks
Lifting to fold the front side inside, alternately alternately, the line of each breastplate. Cold and strip out the outlet, carrying a line from the bottom cut to the top and fixing the bar. At the top of the filthy ends of the stitch threads. The depth of the outturhouse will begin in the side of the side cut.
Front Plot Skirts / Fold
The front side of the skirts fold the front side inside, aligning the line of each fold. The folds will burst from the top to the shooters. At the beginning and at the end of the lines perform the leaf. The depths of the extracts start to the middle line and remove along the top cutting of the front cloth skirts.
Seam waist pass
The bodice is transferred to the front cloth to the front side of the front side to the front side, scalulate cross-cuts (check mark 1), step by aligning the lifts of the leaf with the folds of the front panel skirt. SPU allowance time and disappear.
Backrest / seams waist backrest
On the parts of the leaf of the back and on the rear panels, the skirts are sharpening (see step 5). Fucks depths back to the line of the middle of the back. Pieces of the leather backlock to the rear side of the skirt with the front side to the front side, scalulate the transverse sections (check mark 2) and hold, aligning the cuttings. Shutters wash and disappear.
Poveless zipper
Intersight of the middle sections of the backs of the back, wash. Opened hidden zipper apply the top side down on one part of the back at a distance of 5 mm from the edge of the cut (front side), the upper cloves of the secret zipper alpine combined with the linen of the neck. Lightning fasteners are damped to a crash label using a special foot for induction of the hilt zipper. The other taper of the secret zipper is similar to the other edge of the cut.
Middle seam on the back
Tightened zipper close a bit. Skirt's rear panels fold the front sides, scaliate medium cuts, slotted along the middle of the back. Perform the middle seam on the back from the slot tag close to the last stitches of the seams of feeding the secret zipper, while the free end of the hidden zipper is unscrewed to the edges of the allowances. At the beginning and at the end of the line, perform the leaps. At the end of the cutting of the slot (the right rear cloth of the skirt) in the corner, do the first to the line.
Slot
Middle seam scrums are irrigated. In the Tagging Tag on the hidden zipper, perform a dense leaf, the bottom end of the zipper cut at a distance of 2 cm below the plus tag. Punches at the edges of the slot from the peckerel they start on the left rear pilot skirt. Locking for a longitudinal cut section for the Slot (right rear pilot skirt) Sent back to the wrong side and pour. At the top of the Slice's Power Supplies to the left back tunnel of the skirt. From the front side, the left rear pilot of the skirt will shoot along the plated oblique line, fixing the linque allowance.
Shoulder seams
Before placing the front face to the front side, scroll shoulder cuts (check mark 3), bend. Shutters wash and disappear. The throat of the neck of the back is imposed on the neck of the neck of the facial side to the face, sharp shoulder cutters (check mark 4). Swiss allowances are irrigated. Nizhny cutting of the neck of the neck. Wake up.
Neck / obtachka
The coverage is glued to the neck of the facial side to the face, aligning the shoulder seams. Rear ends of the garment, unscrew, not reaching 5 mm to the edges of the cut, stick to the neck of the neck. Power points along the edges of the cut together with the tips of the secret zipper, turn on the front side and stick to the neck of the neck over the wrap. Along the plated line of the neck, laid the line. SPU pulp cut close to the line, on the sections of the rounds, perform the arrogant, along the line of the middle, follow the arrogant to the line (arrow).
Clean the wrapper on the wrong side and sew
Help the neck. Up. Power supply of the suture of the apparable to the wrapper and pour close to the seam to the maximum possible length. Help the wrapper on the wrong side. Take the neck and affect. Cutting a trick manually to the allowances of shoulder seams. Rear ends of the wrapping of the hilt flashell.
Side seams
On the forefront, make and notify the side sections along the alignment lines. Before placing the front side to the front side, scroll the side sections, together the waist seams. Cuts Stick. Shutters wash and disappear. Tips Note to the straightflows of the transition and the trick manually. Ends Tesm are subject to lateral seams and in the seams of extracts, pre-removing neatly beads from the allowances. Fiti secure.
Sleeve
The elbow parts of the sleeves impose on the top of the sleeves face-side to the front side, scalulate the elbow slices (check mark 6), bend. Shutters wash and disappear. Sleeves fold along the front side inside. Scoop lower sleeve cuts (check mark 7), bend. Shutters wash and disappear. Sleeveless nose bending - see the step "Niza" step.
Touch the sleeves
Each sleeve is brushed to a cross-side of the facial side to the front side, aligning the transverse labels 8 on the sleeve and on the shelf, as well as the bottom seam of the sleeve with the side seam. The transverse label on the open hoses align with the shoulder seam. Sleeve do, slightly requested from • to • OKAT sleeves. Put the sleeve. SWABLETS CHOOSE WEEW TOGETHER, OKANE HOLD ON SLEEVE.
Niza / Slot Frig
Package on the left edge of the spline slot decompose. Locking on the bottom of the niza dresses, wash, unscrew to the wrong side, pinch and hitch manually with incomplete stitches. With the front side of the stitches should not be visible. The slot of the slot is rejected again to the wrong side and the trick manually to the niza bending. The edges affect.
A source