Do not waste money for heating. Woven your home with simple girlfriend!

Anonim

Do not waste money for heating. Woven your home with simple girlfriend!

War down You can quickly and quite inexpensively! Hand made solar panel to heat the house directly. This type of heating is demi-season, it is very well suitable for spring and autumn pores, when heated the house is seriously early, but the street is already cool enough.

The first step K. homemade collector - Collect an impressive number of aluminum cans from under beer. You need plywood, in order to make the body, glass, foam and paint. See the video about how to make a sun collector, you will be sure that it is simple!

How to insulate the house

  1. At first prepare banks from under beer or any other drinks. Please note that banks must be aluminum. Check, aluminum bank or iron, can be using a magnet. Make a hole in the banks, as shown in the picture. From below, take two small holes with a nail or drill, top with the bank with scissors.
  2. Well-wished banks with a detergent for dishes. Seeing them outdoors.
  3. Now a responsible moment - you need to glue banks. The top and bottom of the banks are created for each other, because it is completely simple. Silicone glue is thermal resistant, so that it can be used to make a manifold with a light heart.
  4. So that you have a smooth solar tunnel, make a pattern from a tree, in which it is more convenient to glue banks. Fish two boards with nails at right angles.
  5. So easier to dry banks. The capture is that the template is fixed until the banks are completely dried.
  6. Now you can take a framework. The box needs to be made of wood and aluminum thickness of 1 mm. The circle with round holes for cans is easy to do with the help of a special nozzle on a drill.
  7. Remember that the glue dries not as fast as you think. Let the glued box dry for 24 hours.
  8. Inside the box it is necessary to apply insulation from fiberglass or foam. Holes for the input and outlet of the air should be surrounded by isolation especially carefully.
  9. Folding glued banks of black paint and placing in the locker. These black cans are the main detail, it is called a helicider. It is banks that will attract the sun's rays and warm. On top of the banks are closed with a cap from plexiglas.
  10. The last step is to install the thermostat with sensors. If you did everything right, your solar panel will produce 1-2 kW energy per day. It all depends on how sunny will happen.

The only drawback of the design is not to accumulate heat that produces. Therefore, at night, the collector cover needs to be closed so that the house is not cooled.

This invention deserves close attention, it reminds us that the future has come. Rational use Natural energy - Wise and inevitable decision.

Now you know how the solar collector is being done. It is very useful information for everyone who has a private house and who comes to its arrangement is reasonable. Perhaps this idea will make your home cozy, warmer and original.

Tell your friends about a simple sunny collector! Our person will give the will - he will meet from beer cans even collender.

A source

Read more