You will need:
Ironing board; Iron;
parchment paper;
fabric stabilizer;
thin cloth;
Adhesive gasket material.
It should be noted that this method will help to cope only with small holes. Put the parchment paper on the ironing board, and from above - a torn item with an invalid side.
Gently squeeze the hole to reduce it.
On top of it, put a square piece of the lining fabric, and from above - the stabilizer.
Now cover the damaged surface with a thin cloth, which will protect the thing from an overly high iron temperature.
Bind the irrigated area, and then leave it for 10 seconds, making sure that everything remains in their places.
Remove the iron and remove the fabric. Remove the thing on the front side, squeeze the hole again and carefully swing it.
Voila! The hole is practically not visible!
A source