Probably, each has such a situation. Just imagine, you put on one of your favorite and cozy T-shirts, and here you see that a hole gaps right in the midst. Of course, you can take a needle and sew, but it is obvious that the result will be so-so. At this point, many will upset, thinking that the favorite thing is no longer saving.
Or do you still have something to do?
Now you will learn a brilliant way to eliminate holes, which will not even require the use of threads and needles. The whole process will take no more than 10 minutes. All you need is to find the necessary tools in the sewing store. It will be necessary to do this only once, so you provide yourself with everything necessary to eliminate holes in your favorite things for many years.
So you will need:
- a hole with a hole (best if its diameter is no more than 0.5 mm);
- Iron and ironing board;
- parchment paper;
- Water pulverizer;
- white fabric;
- Putting tape for gluing fabric;
- Thin glue phlizelin.
Put the parchment on the ironing board. It will help you protect the board from possible pollution.
Remove the thing inside out and put on the ironing board. Two the edges of the hole as close as possible to each other, so that they come into contact, and the hole disappeared.
Take a small piece of tape-web for gluing the fabric (sold at any fabric store). Take it on the hole, and then on top. Put a small piece of adhesive fliesline (can be found in the same fabric store).
Install the iron to the "Wool" mode. Top of the repaired thing neatly put a white cloth, trying not to shift the patchwork. Moisten a white tissue with a pulverizer. After that, carefully put iron into place with a hole. Do not drive the iron on the surface. There is a risk of shifting patches. Just hold it about 10 seconds.
Remove the white cloth, and remove the thing to be repaired. If you notice that the threads around the hole are not glued together, then repeat the procedure again.
For the first time it may be needed for more than 10 minutes. But when you understand the technology, the next time you need to eliminate holes, you will need much less time.
This method is much more efficient than ordinary sheep. First, it is faster. And secondly, the custodial hole will always stand out. And this method will help you eliminate the hole so that no one can even guess that it was once there!
A source