As a martin table washed down

1. This time I decided to stir my new desktop. By tradition, the cat was a faithful assistant and ideological inspirer.

All brands and names are not advertising for the sake of the facts for.

2. That's how my workplace looked so far. I have already been 12 years old on this computer table. It is very close, but there was no place for more at that time. Klava had to be cut to the left by 30%, so that the mouse could be written. And the poor amplifting at all had to put on the edge. In short, I suffered ...

3. At first, the search for the finished table in Magazam, Avito, and Ave. Zlata places. Everything was not that ... came to the conclusion that we would have to order a table under myself.

Well, I rushed to draw it in my usual 3D Max (I am architect-designer, if what). I decided on the form immediately - I wanted two stands (one of them under the systemist), a shelf for the amp between them and a glass countertop. No matter how simple, but in the striving for absolute perfection, I lied the details of the table a couple of weeks between the case.

Having a sketch and overall dimensions on his hands, turned to furniture makers to assess the value of their work for such a "miracle". Answer me a few pieces - 33 pieces (!). I was not ready for this and considered them requests awesome.

Began to think, and not to collect the table itself? At first, just a joke, then more and more seriously. Nenauche? I already can drill holes. Having read the furniture forums, gained confidence that about 70% of work for me. The worst is the most terrible drawers, but if you do not rush and be attentive, that is, the chance that they will work badly.

Once again, making sure that the overall dimensions of the table are true and allow him to comfortably accommodate in a targeted place, started a detailed drawing (I was advised to master the PRO100, but I was too lazy - I was used to draw in auto channel), I got used to draw in autocada), made a list of tables for cutting LDSP, glass table top , Furniture list ... to retreat nowhere.

4. Well, and rushed! I bought LDSP with a saw and caught the fitness.

And then I managed to realize my long-standing dream - the acquisition of my own drill !!! Yes, it is own. I no longer wanted to ask anyone, I wanted personal.

How I was waiting for her, how many excitement was when choosing! And the feeling of the complete euphoria, when she was in my hands! It was decided to take a weak and easy for my hands, suitable for the tasks. The screwdriver was also considered, but came to the conclusion that the drill is universal.

A curious conversation on the phone came out with a girlfriend in those days. She told about a new down jacket with an inspiration, and I spoke with a trembling in my voice: "Imagine, I have a drill! DRILL!")))

By the way, Martin Drill recognized and accepted into the family. If before that, from a broken "rent" from a friend, he dug deeply and went out no earlier than an hour after the completion of the work, he sat next to the new drill, without fear of attacks.

5. Do not delay for later, it took place for the most saturated loca-saturated locally - a tumba with drawers. Practically watched death in the eye, expecting that I am about to help the jamb). For the shading, the simple design of three trimming of LDSP was free. Adhesive, cut, whipped ...

The same fastener was used when drilling holes for configmatics. Homemade conductors (templates) screamed from the local YaPaver. In fact, we were familiar in real life, and he accidentally calculated according to my posts that I am on the Yap - this is me, straight commissar Megre).

6. 1.11.17 Martin had a birthday. Well, there, party and all that ...

7. Boxes of drawers are ready, began to fasten the ball guides. Chose with a push-open mechanism to avoid the handles (and then, I have the ability to cling to abrasion and bruises for everything that sticks out).

8. Tumba is ready - Martin controls.

9. TRA-TA-TA (drum fraction) ... Boxes insert - Daaa! They work! Not only do you go on the rails, so also open when pressing! It inspires, you can go further.

10. Draw legs now - spit!

11. Cut (mostly martin) bottoms for drawers. Behind the wardrobe was a long sheet of fiberboard, finally found his application. Makeup knife, of course, long, but even.

12. And the second end is collected. It had to do the very hardening holes for the system ventilation, because When picking up the LDSP, the masters said that they had no tool for such frequency.

13. Spy.

14. Well, my facades arrived (I waited almost 3 weeks). Selected from MDF with 3D milling.

15. We connect the cabinets to the shelf for the amp.

16. In the glass workshop, the glass was ordered with artistic sandblasting and legs to it. The drawing was the subject of my torment within a couple of weeks. Crushed with huge black flowers on geometric patterns ... Then in the attack of creative, I dawned on it that the silhouette of Martin was needed.

17. But the glazier has accumulated, forgetting about the upper chain of traces. I went all day, suffered because of this omission.

18. Glass installed, Martin tests: will it be convenient to the amplifier?

19. Forcener drill (taken from a friend) drilled holes under the loop. In MDF, as it turned out, to do them longer than in LDSP. I hung the door on flawed loops, attached the pusher, so that it is not to use the handle during the opening process.

20. Now that the main design assembly, measured the exact size of the glass shelf under the clave. (The keyboard decided to remove from the countertops to exclude the laying of a cat carcass on it, which caused the pressing of random key combinations).

I ordered in another glass workshop, and already a week did it, I was going to wait. I came, took, insert - it does not fit in the laid place, measuring - 4mm more! Are they fucking? All glazes, what are they kosych? I grab my misses. I call them, present, say: come to correct. And by the way, I traveled behind the glass on the vele (it was sitting in a backpack). This is still pleasure, with a glass of backpacks with a glass on the borders ride 15 km.

After all tests, the shelf is installed in the mount, which had to collective, screwing the shelter to the ball guide guides

(Request to dust does not find fault).